Stahlwille Double Open Ended Spanner 21 x 23 mm

The Einhell Power-X-Change Combi & Impact Driver Twin Pack, contains the following: 1 x 18 Volt TE-CD 18-2 Li-i Power X-Change Combi Drill is a powerful and versatile tool for screwdriving, drilling and hammer drilling jobs. It has a robust, long-lasting 2-speed metal gear box for high torque and torque slip coupling that prevents over tightening of screws. Chuck: 13mm Keyless. No Load Speed: 0-320/0-1350/min. Max Torque: 48Nm 25 Settings. Capacity: Concrete: 15mm. Weight: 1.76kg. 1 x 18 Volt TE-CI 18 LI Power X-Change Impact Driver is fitted with a unique triathlon motor that is powerful and efficient for the highest demands in power-sapping screwdriving jobs. The special impact mechanism eliminates any torsion force on the user’s wrist. Short, lightweight design with ergonomic soft-grip surfaces and a rugged aluminium housing with additional rubber supports for increased protection. Bit Holder: 6.35mm (1/4in). No Load Speed: 0-2,300/min. Impact Rate: 0-3,200/bpm. Max Torque: 140Nm. 1 x 18 Volt Power-X-Change Charger that features a 6-step charging condition display and is ready for wall-fastening. The charger uses an intelligent charging-management-system for long battery life (battery status will be constantly checked and accordant loaded, a deeply discharged battery will be charged in repair mode). Input Power: 240 Volt. Output Voltage:21 Volt. Charging Time: 1.5Ah: 30 min, 3.0Ah: 60 min, 5.2Ah: 130 min. Weight: 0.5kg. Also comes with 2 x 18 Volt 1.5Ah Power X-Change Li-Ion Batteries and 1 x Toolbag.

These Forgefix high-low thread Concrete Frame Screws are Zinc Yellow Passivated for increased resistance to corrosion. They offer a virtually stress free fixing, allowing close to edge applications. They are through-fixing, eliminating the need for marking and re-positioning when fixing batons etc. The Torx compatible head of the screw enables increased torque control. APPLICATION: Extremely popular fixing for window and door frames. Also now used as a versatile fixing for many applications in DIY, Joinery, Plumbing and Electrical trades. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. By design, Torx compatible head screws resist cam-out much better than Phillips or Slotted screws. Where Phillips heads were designed to cause the driver to cam out, to prevent over-tightening, Torx compatible heads were designed to prevent it and to achieve a desired torque consistently. Torx compatible head sizes are described using the capital letter 'T', followed by a number. A smaller number corresponds to a smaller point-to-point dimension of the screw head. Only the proper driver can drive a specific head size without risk of ruining the driver or screw. High-Low Thread screws have an excellent holding power in wood due to their alternating high and low thread heights.Concrete Frame Screw Torx High-Low Thread ZYP 7.5 x 122mm Bag 10

The Bahco Screwdriver for Pozidriv head screws. The double shape handle allows for optimum grip and maximum torque power. Permanent colour codes at both ends of the handle, for a quick identification of the tip. The blade tip is made from high performance alloy steel. Chrome plated and entirely hardened. Black finish tip for higher accuracy. The size and part number are laser branded on the blade for easier identification The Hexagon profile blade and bolster allow the use of a wrench for jobs that require more torque. The blade continues through the handle with no loss of hammer blow energy. Metallic cap gives protection during jobs requiring high impact. Conforms to ISO 8764. Colour coded for quick identification of tip type: Yellow: Slotted.Red: Phillips.Blue: Pozidriv.Green: Torx.Purple: Hexagon (Nutdriver).Bahco Tekno+ Through Shank Screwdriver. Pozi Tip PZ3 x 150mm.

Bahco 80 Series Chrome Plated Finish Adjustable Wrenches with tapered jaws with a measurement scale on the fixed jaw. They have a 16º head angle with no protruding shank when fully open and a strong I section handle with a spring loaded square section, and a knurled adjusting nut.Overall length: 300mm (12 in).Jaw Capacity: 34mmWeight: 645g.Spare Adjustable Jaw BAH8073C-2 - Available to orderSpare Knurl Set: BAH8073C-95 - Available to order

IRWIN Record 200-45 Pipe Cutter is perfect for cutting plastic pipe with exceptionally thin cutting wheel and roller.It will also cut copper tube but its use should be confined to one or the other as cutting copper will reduce the effectiveness of the wheel on plastics. Die-cast body with stove enamelled rust resistant finish. Capacity: 15 to 45mm (9/16 to 1 3/4 in).

This R.S.T. Plasterers finishing trowel has a strong and durable carbon steel blade, which is fixed with invisible rivets. Finishing trowels are used in smoothing and finishing the surface of plaster. They help to compact the surface and add to the quality and durability of the work. Size: 280 x 115mm (11 x 4.1/2in).Fitted with a straight wooden handle.