Fisco Combination Square set for use outside and inside as a try square, mitre square, depth and marking gauge. It has a lightweight zinc stock and the rule has ground edges and ends. The centre head enables the accurate location and marking of the centre of circular items. The graduated protractor head can be turned through 360° for measuring and constructing angles. Size: 300mm/12in.
These Roughneck Professional Bevel Edge Chisels have high quality, drop forged Chrome Vanadium blades for long life performance. The bevel edge blade has two cutting angles - 25° ground angle and a pre-honed 30° angle for immediate cutting. The chisels have contoured, comfortable handles for maximum control. These handles are made from impact-resistant polypropylene with a heavy-duty end cap for repeated striking. The blade tang runs through the handle for direct transfer of striking force to the cutting edge. The chisels are supplied with a blade guard for edge protection and user safety.Size: 32mm (1.1/4 inch).
The Bosch S1122BF Blades are part of the "Flexible for Metal" range. - Bi-M, Side Set & Milled - For Thick Sheet Metals (3-8mm), Solid Pipes & Profiles (up to 175mm diameter) Specification: Total Length : 225mm Tooth Spacing : 1.8mm / 14TPI
ABUS Rock 83CS/55mm open shackle heavy-duty fully re-keyable through hardened steel alloy padlock, with a ball bearing locking mechanism for extra security, has a tough through hardened steel alloy shackle as standard with NANO PROTECT™ Chrome Plating, helping to make rusty shackles a thing of the past. Can be adjusted to operate key retaining or no key retaining, automatic locking or key to lock. Where to use: The 83 series range of padlocks offer a medium to high level of security, with the ability to offer various levels of security within one keying system and is suitable for internal or external use.Width : 55mmHeight : 103.5mmDepth : 25mm Shackel Width : 25mmShackle Height : 38.5mmShackle Diameter : 11mmSecurity Level : 8
The band clamp is suitable for assemblies made of wood, plastics and non-ferrous metals, but it can also be used with ferrous metals when firm all-round clamping which will not damage or distort the work is required. Because the tape is tightened evenly from both sides, pressure is uniformly distributed all round or at each corner, thereby preventing distortion on one side. Self locking occurs automatically as the strap is tightened. This ensures consistent tension, which is maintained until the strap is released. The Vario-angle adapt automatically and infinitely variably to any angle from 60° to 180° . Clamping Range Up to 7mBand Width & Depth 25mm x 1mm Angle 60 / 80 DegreesWeight: 0.53Kg
