The Forge range of Gable Handles incorporates a traditional backplate style with a scroll handle. The sprung handles have a lasting finish. They are ideal for internal or external use as the handles have been tested for corrosion resistance and cycle tested beyond 100,000 uses. Supplied with screws and fitting instructions. Product Dimensions:Backplate: 170 x 42mm.Handle: 55 x 93mm. Fitting Instructions:1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a bradawl.2. Drill Ø2mm pilot holes and reposition the handle before securing using the wood screws provided.3. If fitting Bathroom handles, now insert the bathroom spindle bar through the deadbolt hole of the lock from the outside of the door and place the thumbturn onto the spindle bar. Tighten the grubscrew on the underside with the hex key provided.Designed to be used with any tubular mortice latch. Finish: Brass.
The Union 3K74 series British standard 5 Lever Mortice rollerbolt sashlocks are suitable for use on timber doors hinged on the left or right and are also suitable for use on doors up to 50mm thick. The lock has a deadbolt operation and is locked or unlocked by key from either side with the latch bolt being withdrawn by a lever handle from either side. It has force resistant, anti drill, anti-pick and anti-saw security features and is available with square forend and striking plate with a 14mm bolt throw. They are also pierced to accept bolt through furniture. The 3K74E series locks are recommended by insurance companies, kitemarked to BS3621: 2007 (British Standard) and has been approved by the police Secured by Design initiative. They are also covered by a 25 Year guarantee. Deadbolt: Brass, with hardened steel rollersLatch Bolt: Roller bolt (non handed)Follower: Sintered Iron, 8mm squareKeys supplied: Standard differ supplied with 2 keys. For locks to pass please specify number of keys required.Key Blank Number: B-K722 (standard)Cut Key Number: B-5LCNB Not suitable for master keyingRebate Kit B-3K74R (13mm, 19mm and 25mm) EN1634-1 assessed for use on 60 minute timber fire doors.Visi packed.Finish: Satin Chrome FinishForend: Stainless SteelBox Strike Assembly: Painted to match forendCase Finish: Silver powder coatCase Size: 80mm x 108mm (3in)BackSet: 53mm This is the measurement from the edge of the door to the centre of the keyhole.Centres: 57mm This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole. In the UK this is commonly 57mm.
Made of polyester material,waterproof, anti-mildew and safe.Ideally suits most standard sized bathrooms.Decorate with rainbow wood floor pattern make your bathroom full of vitality.Can stop splash water and offer an independent bath space.Attention:Please low temperature washing and ironing, do not bleach and dry clean.
A traditional Forge Bow Handle. Ideal for internal or external use and treated with a long lasting lacquer finish to prevent discolouration from weathering. Supplied with all fixings and fitting instructions. Fitting Instructions:1. Position handle in desired location and mark the fixing holes with a pencil.2. Drill holes with a Ø2mm drillbit, reposition handle and fasten in place using screws provided.Chrome finish.