Retro Style Shower System Set,Rainfall Shower System Ceramic Valve Two Handles Three Holes Bath Shower Mixer Taps with Hot and Cold Switch Lightinthebox

The Ridgid SeeSnake® nanoReel is ideal for inspecting places where previously only bore scopes were able to reach. Suitable for boiler tubes, supply lines, sprinkler systems and a wide array of speciality applications. Featuring a small 15.5mm camera head that is capable of tight turns, 90° arcs from 30mm upwards without difficulty. The unit is lightweight and compact, allowing easy transport and efficient storage. Offers multiple monitor compatibility, can be used with a SeeSnake® monitor or micro CA-300 and microEXPLORER™ Digital Inspection Cameras. The inner drums are interchangeable to cover different applications.

The ABUS 70IB Series Marine grade padlocks have a solid brass body sealed in a protective vinyl cover with drainage channels to protect the cylinder against water and dirt. The shock absorbing vinyl casing prevents damage to polished surfaces. They have a precision pin tumbler cylinder with a stainless steel shackle and rust-free internal components for medium security requirements in severe weather and environmental conditions, ideal for securing to vehicles and boats. The inside parts are made of 100% rust-proof materials and have drainage grooves to carry off penetrating water. They also feature a double bolted shackle and a self locking cylinder. Codes ending LSC indicate a long shackle. Keyed alike available.ABUS 70IB/50HB80 50mm Brass Marine Padlock 80mm Stainless Shackle Keyed 6401

Featuring REDLINK overload protection electronics in the tool and battery pack to deliver best in class system durability, this tool is a compact 3/8inch impact wrench that measures 152mm in length to make it perfect for working within confined spaces. Designed with the flexible battery system that works with all Milwaukee M18 batteries, REDLITHIUM-ION batteries gives up to two times more run time, 20% more power and two times more battery life. The battery also operates better at -20°C, than any other lithium-ion batteries.The individual cell monitoring optimises tool run time to ensure long term durability, whilst the heavy-duty full metal gearbox and gears provide superior durability and maximum torque.With 3/8 inch square drive to allow for use with universal sockets, this tool also has an on board fuel gauge and a LED light, whilst its individual cell monitoring optimises tool run time to ensure long term durability.

Number of drilling modes: Three. Hammer drill, rotary drill, hammer only. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling. The HR3210C features the unique Makita AVT Anti Vibration Technology design employing the pneumatic pressure created in the drills hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration Forward/reverse rotationVariable speed triggerTorque limiter3 functionRotary onlyRotary hammerHammer onlyDouble insulated Blows per Minute: 1,650-3,300bpmNo Load Speed: 315-630rpmInput Wattage: 850wMax Bit Diameter: 32mmMax Core Diameter: 90mmImpact Energy: HR310C: 5.6 JoulesHR3210FCT: 6.4 JoulesWeight:HR310C: 5.2kgHR3210FCT: 5.4kg Chuck type: SDS plusVibration drilling : 2.5 m/sec²Vibration hammer drilling: 10 m/sec²Vibration chiselling: 7 m/sec²Vibration K factor: 1.5 m/sec² Supplied with: Side handle, depth stop, bit grease, carry case. HR3210 FCT also supplied with Quick Change Chuck.

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

Rustins Quick Dry Radiator Enamel is ideal for touching up white appliances. The enamel is specially designed so that it stays white and does not yellow with age. The enamel is touch dry in 30 minutes, Heat resistant, and low odour.Not to be used on oil filled electric radiators. Avalible in gloss or satin finish.Rustins Quick Dry Radiator Enamel Satin White. Size: 250ml.