2PCS PU Leather Knitted Car Headrest Pillow Neck Support Cushion Seat Accessories

RX-7V Ventilation New diffusers are 20mm longer and straightened for improved aerodynamics, working together with the Air Wing to improve stability. Compared to the previous diffusers, the efficiency of the intake scoops of the new diffusers has increased by 19%. The new air intake vents not only have more adjustability with three positions, closed, half open and fully open but also help to improve sealing that decreases wind noise and water intrusion. Shell Construction: PB-SNC2 Peripherally Belted Structural Net Composite Arai´s proprietary (super fibre belt) Peripheral Belt, borrowed from our F-1 technology, maximizes shell strength and flexibility while maintaining low weight. Positioned across the top of the eye port, this band allows the use of a thinner EPS liner which greatly enhances the upward field of view – especially appreciated in a full racing tuck! The Structural Net Composite adds a physical bond to the resin bond of the many layers of fibres and reinforcing materials within the shell. Variable Axis System (VAS) With VAS, the visor mounting position is lowered, yielding an average of an additional 24mm across both temple areas, in pursuit of the ideal smoother shape that increases the ability of glancing off energy. As a result, this has made it possible for more of the shell to be smoother along and above the test line of the Snell standard. Ventilation: Free Flow System (FFS) Creates airflow under the helmet that reduces wind noise and turbulence while increasing the exhaust of hot air. Ventilation: Eyeport Airchannel Enhanced air exhaust from the eye port area, pulled through dedicated air channel to side ducts, improving efficiency and reducing noise. Front Ventilation: Center top vent The new Top Vent provides 11% more airflow than the previous Vent. The new bigger switch makes opening and closing easier. The new Top Vent has three positions, closed, half open and fully open to adjust the airflow and prevent water intrusion when fully closed. Front Ventilation: Diffuser system The new diffusers are 20mm longer and straightened for improved aerodynamics, working together with the Air Wing to improve stability. Compared to the previous diffusers, the efficiency of the intake scoops of the new diffusers has increased by 19%. The new air intake vents not only have more adjustability with three positions, closed, half open and fully open but also help to improve sealing that decreases wind noise and water intrusion. Front Ventilation: Brow vents extended to temple area Fresh air can enter directly to the forehead area without the need for holes in this critical area of the shell and impact absorbing liner. For specific models the ventilation is extended to the temple area. Rear Ventilation: Neck exhaust vent To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet. Rear Ventilation: Side exhausts Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance. Aerodynamics: Pull Down Chin Spoiler Helps minimize wind noise and also aids with the extraction of hot air from the face area. Provides additional deflection of road debris away from neck. Depending on the model the Chin Spoiler is retractable. Aerodynamics: Patented Air Wing® adjustable MotoGP tested and designed to greatly reduce drag, turbulence and buffeting resulting in more comfort and additional top-speed. It improves stability of the helmet at high speeds or when braking hard and reduces noise. Depending on the model the Air Wing is adjustable in five different angles of attack positions to suit every riding position. Visor: VAS Max Vision Visor with De-Mist option VAS MAX Vision shield is standard to provide better visibility in all seasons and for all types of riding. Comes standard with Clear anti-fog Pinlock insert to be installed as needed. Visor: Pinlock insert lens included Effectively prevents misting and fogging of the visor, even under extreme wet and damp conditions. May be cleaned and changed easily. Interior: Antimicrobial Liner New exclusive liner with antimicrobial stays fresher between cleanings. Interior: Replaceable Interior Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Replaceable Neckroll Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Facial Contour System (FCS) To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure. Interior: 5mm ’’Peel Away’’ Ear cups/Cheek pads Giving even more ability to craft the perfect fit and comfort, the cheek pads now feature a 5 mm peel away layer for added room if needed. Interior: 5mm ’’Peel Away’’ Temple pad Arai´s peel-away temple crown pads give the option of 5 mm more interior with* if needed. Comfort: Emergency Release System (ERS) Allows easier access to an injured rider. By pulling the orange tabs integrated in the pads, the cheek pads slide out. Making helmet removal easier for trained medical personnel and rescuers. Minimising the risk of additional injury. Comfort: Breath guard Works in conjunction with the dual-pivot® chin vent to better direct fresh air to the inside surface of the shield while at the same time directing hot breath down and away from the inside surface of the shield. Comfort: Chin Curtain Attached to the bottom of the helmet, the new chin curtain helps to further accentuate the Egg-shape form. The curtain simultaneously blocks air intrusion from turbulent air below and increases negative pressure to enhance the exhaust function of FFS by drawing more air from the mouth area. The improved airflow reduces noise even further. Approval: ECE 22-05 The most common helmet certification internationally, required by over 50 countries worldwide. Approval: SNELL M2010/2015 The American SNELL Memorial Foundation is an independent organisation, SNELL M2010 is their latest new, more shock-absorbent standard. For the M2010 standard a steel ball shaped rather like a tennis ball anvil is used, they also test with flat and “kerb” shaped anvils). The impact test area of SNELL is larger than that of ECE. Multiple impacts and a penetration test on random spots are used. Five times inspected Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections. Washable interior The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water. Handmade It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours. All-day comfort All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai. Penetration tested All Arai helmets are penetration tested, although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet. Double-D ring device The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener. Smooth shape, better protection The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact. Hard outer shell, soft inner shell Arai uses a very hard outer shell to spread impact forces and a soft inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component. 5-year limited warranty All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture. Arai In-house test This Arai helmet is designed to meet the stringent Arai In-house standard requirements, in addition to mandatory standards such as ECE 22-05 and voluntary standards such as SNELL M2010.

Mit einer Fiberglas-Schale eine komfortable, abnehmbar und waschbar Innenfutter, abnehmbare und verstellbare Backe, es kommt ohne Visier, aber ruft eine Lederband für die Brille (Gläser und Motorrad Masken). Leicht und bequem, wird Sie dieser Jet mit Vintage-Design eine schöne Herstellung Helme ansprechen. 2 Schalengrößen erhältlich.ZERTIFIZIERUNG: Jet E22-05GEWICHT: Über 1000 gSHELL-ZUSAMMENSETZUNG: FiberglasKINNRIEMEN: Mikrometrische Kinnriemen SpindSTANDARD-VISIER: Anti-Kratz CristalINNEN: Abnehmbare, verstellbare und waschbare Innenfutter. Für Gläser geeignet und kompatibel mit Bluetooth-Kommunikation-kit

Features
Finally a boot made just for the supermotard rider. The gaerne sg.10 supermoto is sure to be a winner! It is produced of full-grain premium leather with an injection moulded front shin plate and ankle/heel cup. This new lightweight feature allows the rider more ankle support and a comfortable fit thanks to the exclusive “wrap around” ankle pivot system that surrounds the ankle while at the same time flows with your natural movement to ensure a great fit. All four of the light-alloy buckles are replaceable and have adjustable straps. The boot also features an internal breathable lining. The new vibram sole is moulded from a special compound which is highly resistant to wear and has a special feature of replaceable sliders which protects and limits damage to the sole. The new vibram sole is moulded from a special compound which is highly resistant to wear and has a special feature of replaceable sliders which protects and limits damage to the sole.

Designed using Alpinestars exclusive Drystar® construction, the Barcelona Drystar® Jacket offers true versatility with waterproofing and great levels of breathability, even in difficult riding conditions. The technically advanced construction of this jacket offers protection and abrasion resistance and is adaptable to all weather conditions. The Barcelona Drystar® Jacket also comes equipped with the ability to upgrade with Alpinestars Nucleon certified chest and back protection. Features
certified with Level 1 certified Bio Lite protectors on the shoulders and elbows. Polyfabric outer shell material with Drystar® membrane for excellent breathability and performance in wet conditions. Pre-curved sleeves and ergonomic elbow construction to reduce riding fatigue. Elongated rear profile for added riding comfort and protection Waist adjustment band with hook and loop regulation system for an improved riding fit. Elasticated volume adjusters on sleeves to provide a personalized fit and keep the protection in place. Single, easy-to-use ‘Napoleon’ left Pocket on chest. New ergonomic adjustment cuff closure with gusset and hook and loop system for ease-of-use. Multiple reflective prints to make the rider more visible to other road users, especially when riding at night. Touring collar construction for improved comfort on the bike. Several multi-purpose internal pockets for real-world practicality and a waterproof pocket for added peace-of-mind storage. Two front cargo pockets with double entry and minimalistic bellow, two hand-warmer pockets and two pockets with snap button adjustment and flap for real-world practicality. Two patch pockets on the chest with flaps for ease-of-use with gloved hands. Ventilation zippers on sides for high levels of airflow. Removable thermal liner has a fixed inner laminated Drystar® membrane for excellent performance in wet conditions and a rib bomber collar for warmth. Liner comes with front inner waterproof pockets for added practicality. Soft comfort edging plus comfort fabric on inner collar lining for enhanced levels of rider comfort. Chest pad and back compartments with padding are designed to accommodate the Alpinestars Level 1 certified Nucleon chest and Level 2 certified back inserts, available as an accessory upgrade. Fully certified riding garment to Category II prEN17092 draft standards – A class.

GORE-TEX® Handschuh mit Gore 2in1 Technologie von Held - höchste Taktilität, wasser-/winddicht, atmungsaktivFutterKammer 'dry' mit Pique-Push-Pull Fütterung (100% Polyester) Kammer 'breezy' ungefüttert MembraneGORE-TEX® Membrane basierend auf PTFE-Material wasser-/winddicht, atmungsaktiv Komfort/AusstattungGORE-TEX® 2in1 Technologie (1 Kammer wasserdicht, 1 Kammer ungefüttert) Klettverschluss an Handgelenk und Stulpe Visierwischer Stretchmaterial-Einsätze (100% Polyamid) auf der Oberhand Oberhand perforiert gestochene Unterhand für perfekte Atmungsaktivität und Taktilität SicherheitKnöchelschutz durch Hartplastikschale Handballen/Handkanten-Verstärkung mit SUPERFABRIC® brand material (32%Polyester, 68% Epoxidharz) 3M-SCOTCHLITE™Einsätze Innenhandverstärkung Damengrößenschwarz 01: D-6, D-7, D-8Damen kurz schwarz 01: K-D6, K-D7, K-D8Damen lang schwarz 01: L-D6, L-D7, L-D8Farbenschwarz 01schwarz-grau 03

Features Shell
ECE 22.05 GR 1700 ± 50 KPA 2 Shells Long, Oval
Visor
Twin Shield System Easy to Exctract the visor Scratch Resistant UV Resistant Fog Resistant Air Diffuser Anti Fog System
Comfort
Liner Hyper Vent Removable and Washable Chin Curtain Breathable Hypoallergenic Laser-Cut Foam Ready for LRP 3 Bluetooth
Security
Steel Quick Release Buckle Reinforced Chin Strap Reflective Safety Patch Multi-Density EPS Neck Roll
Ventilation
Channeled Ports 2 Step Front Vent Top Vents Exhaust Port
KPA A proprietary blend of polycarbonate, space age thermoplastics and additional materials specifically formulated by LS2, KPA (Kinetic Polymer Alloy) Offers ultra-light weight and high penetration resistance, but with some flexibility for the ultimate in energy dispersion. This special formula meets both ECE 22.05 and DOT requirements. Twin Shield System LS2 s drop-down sun shield helps protect the rider s eyes from bright sun, and moves up and out of the way quickly and easily when entering dark tunnels, offering a more comfortable riding experience. Reflective Safety Patch To increase rider safety at night or in low visibility conditions the neck roll has a reflective safety patch that glows in the light of other vehicle s headlights.