Gratis
Apoyo
Features
Sportive Air Vent gloves made of soft leather, through the mesh material the perfect choice for the summer So that navigation devices and smartphones can also be operated with the gloves, there is a special touch-sensitive fabric at the tips of the index finger and the thumb incorporated Inside, the Axis is processed with a soft polyester lining Hard ankle protectors and pads on the fingers and palm provide added protection Velcro closures ensure a good fit
The SCOTT Obsess ACS sunglasses are your best bet with superlative protection, secure grip, and a sharp look.
Features
SCOTT Fusion Frame No-slip soft nose pads Textured temple pads SCOTT Precision Optics lens quality Impact protection Base 8 ACS Air Control System 100% UV protection Measurements (mm): glass width: 59 glas height: 39 straps: 120 Thermoformed sport case with microfiber bag
* Dark coloring with used look and crinkle effect * Length adjustment with single cuff and reflective edging * SAS-TEC protectors on the knee. Bag for optional hip protectors | Article: Scott Denim Stretch Ladies Motorcycle Jeans, blue, Size 36 for Women | Article: Scott Denim Stretch Ladies Motorcycle Jeans, blue, Size 36 for Women, blue, Size 36 for Women
'Esatech Back Pro' Rücken-Protektor wurde untersucht, um die hintere Zone vor Kollisionen zu schützen, und bietet eine gute Lordosenstütze. StrukturDie externe Platte ist eine sechseckige Nitril Anti-Schock-Struktur, speziell auf hohe Schlagenergien mit seiner ganzen Oberfläche absorbieren.Die Innenpolsterung erfolgt durch E.V.C. (Stadtportal viskoelastische Zellen), innovative wasserdichte Anti-Schock-Material mit hoher Leistung/Gewicht/Dicke, komplett perforiert, um Schweiß von der Kontaktfläche nach außen zu erhöhen.Die Taille schließen haben eine doppelte elastische Regelsystem, hervorragend gegen Rücken-Schmerzen und komfortabel.Die Rücken-Protektor folgt und Mass es die natürliche Bewegung der Wirbelsäule bietet einen hervorragenden Schutz. Technologien ESATECH SYSTEM (ETS): Es ist eine sechseckige Nitril-Anti-Shock-System. Seine materielle Formel wurde entwickelt, um große Absorption vor allem zu hohe Schlagenergie, auf einem bestimmten niedrigeren Niveau zu reduzieren, während die Wabenform verflüchtigt sich die Aufprallenergie über die ganze Protector-Oberfläche ausführen. Esatech System ist eine ultimative Tech-Nologic äußere Hülle, die einen überlegenen Schutz während Sie elastisch, leicht und Durchführung der erneuern-MEMORY-Technologie bietet. RENEW-MEMORY-Technologie (RNW): Es ist eine integrierte Technologie, die das Material langsam in seine ursprüngliche Form und Größe nach jede Kompression zurückkehrt. Diese Techno-logie ermöglicht mehrere Auswirkungen über die gleiche Oberfläche, ohne Verlust der Schutzleistung durchführen. KALIBRIERT MEHRSCHICHTIGEN dichten (CMD): die Beschützer erfolgt durch Schichten mit unterschiedlicher Zusammensetzung und Dichte, so kalibriert, dass mit einer minimierten Last- und Profi le durchführen. Schiebe-Layer-Technologie (SLT): Es ist eine fi Xing Layer Technologie, die die Schichten in Position hält, wobei ein bisschen dazwischen schieben. Diese Technologie maximiert die Weichheit und den Komfort des gesamten Systems. Lüftung & Schweiß entfernen Textil (SRT): die Beschützer ist komplett perforiert, um die Luftzirkulation zu maximieren. Die Kontaktschicht erfolgt durch S.R.T. (Schweiß entfernen Textil) ist ein sehr transpirierenden 3D Textil, die den Schweiß nach außen überträgt. Technische Spezifi kationen: CE genehmigt EN1621-2, Lev.2; Konstruktion und Herstellung: MADE IN ITALY.Taille-Größe (cm): XS (70 TO77) - S (78 TO85) M(86 TO93) - L (94 TO101) XL (102 TO114)
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
The Cobra is a sports jacket and a direct descendent of our top-of-the-range racing suits. Everything about this jacket - from the material and construction to the fit and safety features - is designed with performance in mind. Protection / Security
Main external material: full grained leather, 1.4mm as perour race suits. Furygan Skin Protect lining approved by Furygan’s R&D to reinforce leather products in terms of tearing and abrasion resistance. D3O homologated protectors for elbows, shoulders and back (1621-2 level 1 Central Back type homologated back protector fitted as standard), which offer full protection without restricting comfort and freedom of movement. External protection shells on the shoulders. Areas exposed to abrasion in a crash situation are reinforced with triple stitching to avoid tearing.
Ergonomics / Comfort
Sport fit Thermal padded lining with aluminium inserts on the chest for maximum protection against the cold. Racing sleeves with Kevlar stretch inside the arms. Leather stretch behind the shoulders, and the elbows. Neoprene inserts on collar and the wrists. Waterproof treated leather. Two connecting zips (one short and one full) mounted on an elastic belt. Four pockets (two inside, and two outside).