The Bosch S644D Blades are part of the "Top for Wood" range. - HCS, Side Set & Ground - For Construction Wood (up to 100mm), Wooden Wall (up to 100mm), Chipboard, MDF (6-60mm), Plywood & Plastic (up to 100mm) - Designed Specifically for Plunge Cuts Specification: Total Length : 150mm Tooth Spacing : 4.3mm / 6TPI
La Haute-Savoie accueille les randonneurs ?t? comme hiver avec ses lacs et ses montagnes comme le massif du Mont Blanc. Ce contraste entre beaut? des lacs et beaut? des montagnes se retrouvent aussi dans les villes. Par exemple, la ville de Sallanches...
The BlueSpot Straight Cutting Snips are drop forged for increased durability. They have accurately ground cutting blades with a nut and bolt joint design. Features a handle lock for safe storage.1 x BlueSpot Straight Cut Snips 300mm (12in)
The Hultafors HDC Heavy-Duty Chisel has a perfect ground blade, bevelled at 25° for the best ratio possible between sharpness and durability. It is forged in one piece with an I-beam going all through for extreme durability and to maximise the force transmission down to the workpiece. The entire chisel including the handle can be positioned flat against the surface for an increased number of applications. The chisel is fitted with a santoprene handle, optimised for both power and precision. Chisels with perfect precision, sharp, heavy duty, and always close at hand. They are ready for tasks requiring extreme strength and precision. They come with a smart holster made from durable PP plastic for increased accessibility, the holster can easily be attached to a belt or on a button. Replaceable nylon striker available as spare part.Hultafors HDC32 Heavy-Duty Chisel 32mm
The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.
