Gratis
Apoyo
A packable and ultra-lightweight waterproof jacket complete with dedicated VR46 design. Features
1 inner waterproof pocket 2 pockets on front Packable Reflective inserts Ultra-lightweight VR46 customized details Anti-floating sleeve adjustment Wrists adjustment Fully Waterproof fabric.
Lässiges Sweatshirt mit dezentem Logo-Label auf der Brust, der auch noch wahnsinnig warm ist: Der funktionelle Pullover aus ColdGear® Material! Das Under Armour Rival Fleece Crew mit der wärmenden Technologie von Under Armour ist ein großartiges Update für Dein Trainings-Outfit - aber auch für die Freizeit! Größenauswahl-Hilfe: Model mit 190 cm Größe und 90 kg Gewicht trägt Größe LGGrößenauswahl-Hilfe: Model mit 180 cm Größe und 74 kg Gewicht trägt Größe MDGrößenauswahl-Hilfe: Model mit 173 cm Größe und 60 kg Gewicht trägt Größe SMEigenschaften: Material: 80% Baumwolle / 20% PolyesterPflegehinweise: Maschinenwäsche, keinen Weichspüler verwenden Fit - Passform: Locker geschnitten Fällt normal aus Loose Passform: Großzügiger Schnitt mit voller Bewegungsfreiheit und einem weiten, lockeren Sitz ColdGear®: Mit dieser Kleidung fühlst Du Dich warm, trocken und leicht. Dieser Schicht vertrauen Athleten, wenn das Thermometer sinkt. ColdGear® macht schwere, voluminöse Ausrüstung bei kaltem Wetter unnötigWeiche Fleece-Innenseite zum Speichern der Wärme, hält angenehm warmÄußerst weiches Fleece aus Baumwollmischung (230 g)Das Material leitet den Schweiß weg und trocknet sehr schnellNeuer, stromlinienförmiger Schnitt für eine sportlichere GesamtwirkungRipp-Bündchen an den Ärmelenden und am Abschluss untenRipp-Einfassung am Rundhals-AusschnittTextilwebband innen am Nacken Under Armour Logo-Label auf der linken Brust aufgenäht
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety SHELL in TRICARBOCO material, mix of Kevlar, carbon and fiber, joint through resine, hand made, using new technologies with vinilester resin. The INTERNAL POLYSTYRENE produced in 3 sizes to get the best fitting. This characteristic allows a gradual and progressive absorption of the energy produced by the impact. Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is determinant for the absorption of the residual energy. A diversified density of the polystyrene, permit us to optimize the mechanical performance of the shell/polystyrene. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Ventilation The internal polystyrene has been studied to work together wityh the air ventilations, put on the shell. The channels allow the perfect inside air flow and at the same time a quick outside air flow from back ventilation. Comfort The CHEEK PADS and the INTERNAL COMFORT shell can be removed, washed and replaced.
They are made of a precious fabric with specific fibers, that offer:
It moves away the body sweat, Keeps rider fresh, dry and completely comfortable, Lightweight, soft and breathable fabric, Performance controlled and certified by ADVANSA.
The cheek pads are easily removable also in case of accident through a red strap which removes the cheek pad even if the helmet is worn by the rider.
Minimalistischer Schienbeinschützer: Der adidas Everlite! Mit verstellbarer Weite durch den Klettverschluss und hohem Schutz durch verstärkten Frontschild: Der Fußball-Schienbeinschoner mit weichem EVA-Material unter dem hochstabilen Schild umschließt Dein Schienbein und hält dem Aufprall stand. Er ist mit einem Doppelriemenverschluss ausgestattet. Gut geschützt kannst Du Dich an jeden Ball wagen!Eigenschaften: Material: 100% PolypropylenHoher Schutz durch verstärkten FrontschildAnpassbare Weite mit DoppelriemenverschlussHoher Tragekomfort durch weiches, synthetisches InnenmaterialGummi-Band mit Klettverschluss oben und unten
hochwertige LED-Lampen fürs Fahrrad, für besseres Sehen und Gesehen werden im Straßenverkehr optimale Straßenausleuchtung: Frontlicht mit Cree-XPE-Hochleistungs-LED und optischem Reflektor optimale Sichtbarkeit: Mit 3 LEDs links, rechts und mittig strahlt Rücklicht im 220° Winkel ab spritzwassergeschützt nach IPX4 zum Schutz vor Feuchtigkeit und Schmutz erfüllt die strengen Anforderungen der deutschen Straßenverkehrs-Zulassungs-Ordnung (StVZO) spezielles Design des Frontlichtes vermeidet, dass Passanten oder Verkehr auf anderer Straßenseite geblendet werden Frontlicht mit 2 Leuchtmodi: volle Power und Energiesparmodus werkzeuglose Montage LED-Batterieanzeige Hauptmerkmale Funktionen Typ Frontbeleuchtung Produktfarbe Schwarz Integrierter Reflektor Ja Schutzart (IP-Code) IPX4 StZVO geprüft Ja Lampen Anzahl LED-Lampen 3 Anzahl der Lichtmodi 2 Energie Energiequelle Batterie/Akku Batterie Akku-/Batterietyp AAA Warnanzeige bei geringem Ladestand Ja Verpackungsinhalt Batterien enthalten Ja Anzahl
Features
ATR Shell (Advanced Thermo Resin) ECE/22-05, DOT and NBR-7471:2001 Soft anti-sweat and anti-allergic fabric inner lining Removable and washable lining Micro-Metric buckle Inner Sunvisor 80% PC Lexan Visor Shield Weight: 1050grs
