Richa Original Jeans, Jeans

Material
soft cowhide breathable HEROS®-TEC MESH fabric Contains non-textile parts of animal origin
Lining
mesh lining 3D air mesh panels in back to promote air circulation
Safety
Connecting zip EN 1621-1 certified soft protectors at shoulders & elbows optional EN 1621-2 back protector Velcro for optional chest protector
Comfort
stretch panels on inner arms soft collar stretch leather at shoulders & elbows hip adjustment Held Clip-in Technology internal cellphone pocket front air-vent zipper cuff in stretch material 3 inner pockets 2 external pockets

In addition to our popular and successful A-FLAT XL and SL pedal, we are proud to welcome the new MD to the A-FLAT family.This allows each rider to choose the right ACROS Pedal, specific to individual needs and riding terrain.Technical specifications:Material: AL / Cr-Mo axleBearings: extra-long bushing / stainless-deep groove bearing, double sealedSeal: R2 rubber lip-sealSize: 100 x 98 x 18mm  / 9 Pins each pedal face (36 in total) for the ultimate gripWeight: 343 g

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety SHELL in TRICARBOCO material, mix of Kevlar, carbon and fiber, joint through resine, hand made, using new technologies with vinilester resin. The INTERNAL POLYSTYRENE produced in 3 sizes to get the best fitting. This characteristic allows a gradual and progressive absorption of the energy produced by the impact. Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is determinant for the absorption of the residual energy. A diversified density of the polystyrene, permit us to optimize the mechanical performance of the shell/polystyrene. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Ventilation The internal polystyrene has been studied to work together wityh the air ventilations, put on the shell. The channels allow the perfect inside air flow and at the same time a quick outside air flow from back ventilation. Comfort The CHEEK PADS and the INTERNAL COMFORT shell can be removed, washed and replaced.
They are made of a precious fabric with specific fibers, that offer:
It moves away the body sweat, Keeps rider fresh, dry and completely comfortable, Lightweight, soft and breathable fabric, Performance controlled and certified by ADVANSA.
The cheek pads are easily removable also in case of accident through a red strap which removes the cheek pad even if the helmet is worn by the rider.

Our company have steady in stock on many soccer jerseys and we can offer reasonable price. Top quality .offer the embroidery logo and the original number . also can do the personal name and number US size S M L and XL . top quality .

Extremely air-tight! Less air loss means having to inflate less. A unique rubber mixture makes it possible. Extremely reliable! Each SCHWALBE tube is individually examined twice at the factory to ensue air-tightness. Special quality control that prevents unpleasant surprises.

A versatile that stands out both for its look than its functionality. Real spearhead of the brand for years, Boxer has evolved to offer today a own style without to skip the practical aspects and protection. Features
ECE22-05 for Jet and Fullface 1650 grs Fiberglass shell Automatic chinstrap locker Cristal anti-scratch and antifog screen Visor Removable, adjustable and washable inner lining. Suitable for glasses and compatible with bluethooth communication kit. solar 50% anti-scratch and antifog