Dainese Cilindro, neck warmer windproof

RX-7V Ventilation New diffusers are 20mm longer and straightened for improved aerodynamics, working together with the Air Wing to improve stability. Compared to the previous diffusers, the efficiency of the intake scoops of the new diffusers has increased by 19%. The new air intake vents not only have more adjustability with three positions, closed, half open and fully open but also help to improve sealing that decreases wind noise and water intrusion. Shell Construction: PB-SNC2 Peripherally Belted Structural Net Composite Arai´s proprietary (super fibre belt) Peripheral Belt, borrowed from our F-1 technology, maximizes shell strength and flexibility while maintaining low weight. Positioned across the top of the eye port, this band allows the use of a thinner EPS liner which greatly enhances the upward field of view – especially appreciated in a full racing tuck! The Structural Net Composite adds a physical bond to the resin bond of the many layers of fibres and reinforcing materials within the shell. Variable Axis System (VAS) With VAS, the visor mounting position is lowered, yielding an average of an additional 24mm across both temple areas, in pursuit of the ideal smoother shape that increases the ability of glancing off energy. As a result, this has made it possible for more of the shell to be smoother along and above the test line of the Snell standard. Ventilation: Free Flow System (FFS) Creates airflow under the helmet that reduces wind noise and turbulence while increasing the exhaust of hot air. Ventilation: Eyeport Airchannel Enhanced air exhaust from the eye port area, pulled through dedicated air channel to side ducts, improving efficiency and reducing noise. Front Ventilation: Center top vent The new Top Vent provides 11% more airflow than the previous Vent. The new bigger switch makes opening and closing easier. The new Top Vent has three positions, closed, half open and fully open to adjust the airflow and prevent water intrusion when fully closed. Front Ventilation: Diffuser system The new diffusers are 20mm longer and straightened for improved aerodynamics, working together with the Air Wing to improve stability. Compared to the previous diffusers, the efficiency of the intake scoops of the new diffusers has increased by 19%. The new air intake vents not only have more adjustability with three positions, closed, half open and fully open but also help to improve sealing that decreases wind noise and water intrusion. Front Ventilation: Brow vents extended to temple area Fresh air can enter directly to the forehead area without the need for holes in this critical area of the shell and impact absorbing liner. For specific models the ventilation is extended to the temple area. Rear Ventilation: Neck exhaust vent To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet. Rear Ventilation: Side exhausts Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance. Aerodynamics: Pull Down Chin Spoiler Helps minimize wind noise and also aids with the extraction of hot air from the face area. Provides additional deflection of road debris away from neck. Depending on the model the Chin Spoiler is retractable. Aerodynamics: Patented Air Wing® adjustable MotoGP tested and designed to greatly reduce drag, turbulence and buffeting resulting in more comfort and additional top-speed. It improves stability of the helmet at high speeds or when braking hard and reduces noise. Depending on the model the Air Wing is adjustable in five different angles of attack positions to suit every riding position. Visor: VAS Max Vision Visor with De-Mist option VAS MAX Vision shield is standard to provide better visibility in all seasons and for all types of riding. Comes standard with Clear anti-fog Pinlock insert to be installed as needed. Visor: Pinlock insert lens included Effectively prevents misting and fogging of the visor, even under extreme wet and damp conditions. May be cleaned and changed easily. Interior: Antimicrobial Liner New exclusive liner with antimicrobial stays fresher between cleanings. Interior: Replaceable Interior Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Replaceable Neckroll Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Facial Contour System (FCS) To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure. Interior: 5mm ’’Peel Away’’ Ear cups/Cheek pads Giving even more ability to craft the perfect fit and comfort, the cheek pads now feature a 5 mm peel away layer for added room if needed. Interior: 5mm ’’Peel Away’’ Temple pad Arai´s peel-away temple crown pads give the option of 5 mm more interior with* if needed. Comfort: Emergency Release System (ERS) Allows easier access to an injured rider. By pulling the orange tabs integrated in the pads, the cheek pads slide out. Making helmet removal easier for trained medical personnel and rescuers. Minimising the risk of additional injury. Comfort: Breath guard Works in conjunction with the dual-pivot® chin vent to better direct fresh air to the inside surface of the shield while at the same time directing hot breath down and away from the inside surface of the shield. Comfort: Chin Curtain Attached to the bottom of the helmet, the new chin curtain helps to further accentuate the Egg-shape form. The curtain simultaneously blocks air intrusion from turbulent air below and increases negative pressure to enhance the exhaust function of FFS by drawing more air from the mouth area. The improved airflow reduces noise even further. Approval: ECE 22-05 The most common helmet certification internationally, required by over 50 countries worldwide. Approval: SNELL M2010/2015 The American SNELL Memorial Foundation is an independent organisation, SNELL M2010 is their latest new, more shock-absorbent standard. For the M2010 standard a steel ball shaped rather like a tennis ball anvil is used, they also test with flat and “kerb” shaped anvils). The impact test area of SNELL is larger than that of ECE. Multiple impacts and a penetration test on random spots are used. Five times inspected Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections. Washable interior The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water. Handmade It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours. All-day comfort All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai. Penetration tested All Arai helmets are penetration tested, although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet. Double-D ring device The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener. Smooth shape, better protection The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact. Hard outer shell, soft inner shell Arai uses a very hard outer shell to spread impact forces and a soft inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component. 5-year limited warranty All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture. Arai In-house test This Arai helmet is designed to meet the stringent Arai In-house standard requirements, in addition to mandatory standards such as ECE 22-05 and voluntary standards such as SNELL M2010.

Animiet durch das Ziel, Motorradfahren praktischer zu gestalten, entwickelte Roof einen neuen Helm, den ROOF DESMO, erster Integralhelm zu 100% modulabel.Mehrere Jahre im Entwicklungszentrum in Südfrankreich waren nötig für die Entstehung diese Models RO31, einer wirklichen Innovation, geschaffen, durch die Verbindung der ureigenen Traditionen bei ROOF, Sicherheit, Ergonomie und Design.Der Roof DESMO leitet eine neue Ära für Modulhelme mit hoher Sicherheit, Komfort und einfacher Bedienbarkeit ein.Zertifizierung als Jethelm und Integralhelm E22-05 J und P Top Venturi Lufteinlässe Kinnteil mit Luftzirkulation effiziente Abdichtungen schützen bei jeder Witterung abnehmbares und waschbares Innenfutter Visier mit Anti-Fog und Anti-Scratch BeschichtungPROGRESSIVER SCHUTZDoppeldämpfung durch progressive Dichte der Innenschale für einen kontrollierten Schutz. Das Luftkanalsystem erlaubt eine umfassende Belüftung des Kopfes. Ein belüfteter Schutz!TWIN DESMO TECHNOLOGIEDie Bewegung des Kinnteils kontrolliert automatisch die Bewegung des Visiers, welches sofort die Position für die jeweilige Konfiguration einnimmt, dicht abschließend als Integral und exklusiv für den offenen Jet, wofür das Visier näher zum Gesicht geht um Turbulenzen zu minimieren Visier offen oder geschlossen - alles ist möglich. DESMO: 2 Helme in einem!LUFTEINLASS VENTURIDie Lufteinlässe per Depression vorn und oben gewährleisten eine sehr angenehme Belüftung des Kopfes und im Gesichtsbereich. Die Intensität der Belüftung ist mit einer Hand regulierbar. Lassen Sie den Wind ins Haar!DUAL-DICHTUNGDie perfekte Dichtheit des DESMO wird durch Verwendung von zwei exklusiven Dichtungen von ROOF erreicht, welche zugleich durch Kompression und darüber gleitend, abdichten. Eine Lippendichtung am Helm und eine zweite Dichtung aus speziellem Schaumstoff, welche immer wieder automatisch in die Ursprungsform zurück geht, am Kinnteil. Fordern Sie den Regen heraus!DEFLEKTIVE BELÜFTUGEin Deflektor leitet bei Bedarf die Luft direkt auf die Innenfläche des Visiers und ermöglicht so eine schnelle Beseitigung von Beschlag. Sie ist dadurch sehr effizient bei unterschiedlichen Wetterbedingungen. Atmen Sie, Sie dürfen!EINHAND DESMOVERSCHLUSSDer Verschlussmechanismus ist sicher und ergonomisch. Verschluss des Kinnteils durch einfaches Herunterklappen in Position Integral. Öffnen durch gleichzeitiges Drücken der übereinander angeordneten Druckknöpfe. Eine Hand genügt, um von Position Jet zu Integral und wieder zurück zu wechseln. Behalten Sie die Kontrolle!3D KOMFORTInnenfutter, Wangenpolster, Nackenring und Windabweiser aus belüftetem 3D-Stoff, demontierbar, waschbar und adaptierbar an Ihre Kopfform für einen sehr hohen Komfort. Sie werden Ihn nicht mehr absetzen wollen!

Marushin continues this tradition with the newly developed 999 RS Comfort. The integrated sun visor, a visor with innovative quick-change mechanism and Pinlock® prepared, the temperature and moisture regulating interior or Marushin ratchet are some innovations that help make even the 999 RS Comfort is an all-rounder in terms of comfort, safety and functionality ,
Very easy. Compact size of the helmet shell. Suitable for spectacle wearers. Prepared for the installation of communication systems. Material
Newly developed, aerodynamically optimized fiberglass helmet shell in two shell sizes from an extremely lightweight, yet high-strength material composition.
Ventilation
The completely redesigned ventilation system optimized in the wind tunnel now allows more air to flow into the helmet via multiple air inlets and outlets. Of course, all slides with gloves are easy to use.
Interior decoration
The Marushin®-Cool interior with improved moisture absorption and faster drying for a comfortable fit effectively inhibits odor and bacteria formation. The head and cheek pads are completely removable and washable. The newly developed cheek pads ensure a perfect fit of the helmet even at high speeds and are designed so that eyeglass temples can easily fit.
Visor
Clear, scratch-resistant, Pinlock®-prepared.
Weight
1.290 g (+/- 50 g)
Clasp
Micro ratchet fastener - all components relevant to safety are made of stainless steel. The renunciation of plastic provides maximum security. The closure is easy to use and easy to adjust.
Exam
ECE 22/05

Pleat PU Leather Zip Up Jacket

* Lining is made of breathable mesh * Double-sided ankle protectors * Contact protection made of antique leather | Article: Stylmartin Arizona Motorcycle Shoes, green, Size 43 | Article: Stylmartin Arizona Motorcycle Shoes, green, Size 43, green, Size 43

Pair 9003/H4 80W 8000LM 6000K LED Xenon White Light Bulbs Headlight Hi-low BeamSpecification:Bulb Size(approx.): 85mm/3.34(H) x 47.2mm/1.86(W)Lamp bead size: 5mmx5mmMaterial: Plastic,AluminumHouse Color: BlackLight Color: Xenon WhiteColor temperature: 6000kBulb Model: 9003/H4Operating Voltage:10V-30VLED Chip Qty: 4 per bulbWaterproof rate: IP67High Beam:Lumens:8000LM/Set (4000LM/Bulb)Power:80W(40W/Bulb)Color temperature:6000kLow Beam:Lumens:4000LM/Set (2000LM/Bulb)Power:40W (20W/Bulb)Color temperature:4000kFeature:1. Beam Angle 360 degrees2. It is durable and convenient.3. Aluminum housing, perfect heat dissipation design.4. Integrated design and waterproof.5. Long LED service life,up to 10,000 hours .6. Plug and play, no modification required.7. Brighter than the regular halogen bulbs and HID Headlights.Note:1. We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.2. Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)3. The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.4. No Instructions Included.Professional Installation Is Highly Recommended!Package included:2 X Light Bulbs