Stahlwille Ratchet Insert Tool 9 x 12 mm 38 Inch Drive

Straight (tooth) files are made from alloy steel and have teeth which are undercut, resulting in faster cutting with less effort. They may be used on all materials from aluminium to the hardest steel without clogging. The undercut and generous radius at the root of the teeth enables the file to clear itself whilst in use. Millenicut files feature a straight tooth cut diagonally on the blade.HandSize 300 (12in)13 Teeth per inchTanged

Socket set 1/4in and 1/2in square drive and combination spanners with dynamic drive profile. Consisting of: 12 x 1/4in Hex Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12 & 13mm.10 x 1/4in Hex Deep Sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12 & 13mm.13 x 1/2in Hex Sockets: 10, 11, 12, 13, 14, 15, 17, 19, 22, 24, 27, 30 & 32mm. 5 x 1/4in Phillips Bits: PH0, PH1, PH2, PH3 & PH4.3 x 1/4in Slotted Bits: 4, 5.5 & 7mm.3 x 1/4in Pozidrive Bits: PZ1, PZ2 & PZ3.6 x 1/4in Hex Bits: 3, 4, 5, 6, 8 & 10mm.8 x 1/4in Torx Bits: T8, T10, T15, T20, T25, T27, T30 & T40.3 x 5/16in Torx Bits: T45, T50 & T55.1 x 1/2in Spark Plug Socket: 21mm (13/16in). 2 x 1/4in Extension Bars: 50 & 100mm.2 x 1/2in Extension Bars: 125 & 250mm.1 x 1/4in Universal Joint, 1 x 1/2in Universal Joint.1 x 1/4in Bit Holder, 1 x 1/2in Bit Holder.1 x 1/4in Bit Adaptor, 1 x 1/4in Magnetic Bit Adaptor. 1 x 1/4in Sliding T-Bar, 1 x 1/4in Spinner Handle.1 x 1/2in T Adaptor. 1 x 1/4in Reversible Ratchet.1 x 1/2in Reversible Ratchet. 3 x Hex Keys: 1.5, 2 & 2.5mm.4 x Flex Head Wrenches: 8x9, 10x11, 12x13 & 14x15mm.6 x Combination Wrenches 8, 10, 12, 13, 14 & 17mm. 1 x Impact & Oil Resistant Case. 1 x Removable Tool Rack for Combination Spanners.

Hammerite "Direct to Rust" Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3-in-1 formula, there is no need to use a primer or undercoat...saving you precious time! It forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion-resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Two coats are required and protects up to 5 years. Specification: Colour : Red Finish : Smooth Size : 400ml Coverage : 0.5m²/L

This hacking knife has a steel blade with twin leather scales riveted to the shaft. It can be struck with a hammer to remove old putty from window frames. Size: 4.1/2in.

Paslode IM65 chisel point brads for Impulse IM65 F16 gas brad nailer. Electro galvanised light duty protection F16 gauge lost head 1.65mm wire brads glued, supplied with Paslode Special Impulse gas fuel cells which drives up to 1,000 brads per cell.Electro Galv: Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.

Hammerite "Direct to Rust" Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3-in-1 formula, there is no need to use a primer or undercoat...saving you precious time! It forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion-resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. The paint has a subtle hammered effect with a metallic sheen, and protects up to 8 years. Two coats are required. Specification: Colour : Black Finish : Hammered Size : 2.5L Coverage : 5m²/L