Ixon Vendetta Evo One Piece Motorcycle Leather Suit, black-yellow, Size 3XL, black-yellow, Size 3XL

Features
Fully adjustable, streamlined visor Reduces aerodynamic drag at high speeds. Ventilation system: the large inlet openings and the rear louvers maximize air flow through the helmet. Large eye opening: offers maximum field of vision and is suitable for all types of glasses. Strap holder: prevents slipping of the spectacle strap. Close the chin strap with a double-D titanium ring 1150g in size M.
AIRFIT® New technology of the inflatable Airfit pump, which is located under the chin and has an effect on the cheek pads for a seat-stable stability, the second sits at the rear of the helmet and this time acts on the forehead and temples. KWIKWICK3 ® Very effective, hypoallergenic, removable, washable, very soft and comfortable to the skin, the KwikWick3 ® lining of the new ScorpionExo® models is the best you can do for your head. TCT® Thermodynamical Composite Technology Extremely light - the weight has been reduced by almost 250 grams - the new TCT ® structure offers unprecedented protection in the world of helmets. This intelligent shell is able to yield gradually during a blow or a bump. This absorbs the most energy in an impact, while retaining the extremely strong TCT ® structure. Removable chin bar ventilation Fresh wind in the world of off-road helmets. The ventilation flap is the answer to the real needs of the driver! The chin guard vent can be removed with a small handle for cleaning. Resetting is just as easy. Removal and replacement are done in a few seconds. Helmet screen EXOLON® Deformable and unbreakable, fastened by screws that give way in the event of a violent impact, the Exolon helmet peak is of spectacular effectiveness.

Sleem hoody leather jacket for bike & free time Features
high quality waxy cow leather AirVent ventilation zips Hoodie (detachable via zip) shoulder and elbow protectors certified according to EN 1621-1 protezione schiena in gomma anti-shock, upgradable with back protector SAS-TEC SCL-M/L 19 2 outer pockets, 2 inner pockets loop to connect jeans

* integrated reflective inserts with the Speed Demon * pockets for double chest protector (Pro-Armor only) * pocket for G1 and G2 back protector | Article: Dainese Bora Air Tex Motorcycle Textile Jacket, black-blue-yellow, Size 58 | Article: Dainese Bora Air Tex Motorcycle Textile Jacket, black-blue-yellow, Size 58, black-blue-yellow, Size 58

Taillight Rear Right Side Tail Lamp Bumper Cover for Audi Q5 2.0T 2009-2016 8R0945096Feature:Perfect to replace your old model.New Stylish design, make your car more fashion.Durable, undamaged.Easy to install, just plugplay.Description:-Shell Color: Red-Light Color: Yellow-Material: Arcylonitrile Butadine Styrene Plastic-Placement on Vehicle: Rear Right-Size: 53.7x5x9.5cm/21.14x1.97x3.74-Quantity: 1 pc-Other Part Number: 8R0945096 8R0945096B 8RD 945 096 8RD945096Fitment:for Audi Q5 2009-2016NOTE:-No Bulbs Included-Pls confirm the fit item if it matches your models before you purchase.-No install instruction included. Professional installation is highly recomended!Package Included:1 x Rear Right Light (Bulbs Not included)

Feature:Lightly and portable, built-in handle, easy to carry.Stylish appearance, popular lines sense.360surround bass sound, sound quality without noise.Play music with LED lights at the same time.Built-in FM radio function, listen to popular music radio, easy operation.Suitable for indoor relaxing or outdoor amusement.Specification:Model: HY-11Material: Plasticbluetooth: V4.2 + EDRRMS power: 10WVoltage: DC 5VBattery capacity: 1200mAhPlay time: About 3-4 hoursSNR: 88dBChannel: 2.1TF card storage: Support max. 32GB(card not included)Frequency: 85HZ-108KHZFunction: bluetooth, AUX play, U-disk, FM radio, TF card playSize: Approx. 15x9.5x24cm/ 5.91x3.74x9.45Package Included:1 X bluetooth Speaker1 X USB Cable

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr