DC 12V 12W 5m Cable Wet & Dry Using Car Vaccum Cleaner

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Package Includes:1PCS front seat coverSpecification:Product Name:Car Seat CoverModel:E07173Size:47.5X49.5X79.5X46.5cm(18.7X19.4X31.3X18.3inch)Color:Yellow Leopard print(A),BlueLeopard print(B),Sunflower(C),Daisy(D).Material:Polyester micro-fiber fabricFeature:1.Fit Most Vehicle, Cars, Sedan, Truck, SUV, Van2.High quality polyester micro-fiber fabric for maximum durability and comfort.3.Designed for quick and easy installation on most car and SUV bucket style seatsno tools required.4.Elastic backing and fastening system ensures a snug and secure universal fit on most standard car and SUV seats.

Klassische Brille, wahlweise mit braunem oder schwarzem Kunstleder, die Gläser sind klar, gelb, getönt oder verspiegelt. Die Aufhängung des Brillenbandes ist mit einem Gelenk versehen, dadurch wird die Brille nicht auseinandergezogen und liegt gut an wenn das Brillenband außen um die Helmschale läuft, auch bei breiten Helmen. Splitterfreie Gläser, CE certifiziert mit UV Blocker, hochwertiges Kunstleder.

The Hoodie Denim Booster is a casual hoodie with Kevlar protection for use in the engine. The hoodie comes with Kevlar panels and removable protectors on shoulders and elbows. In addition, the hoodie s hood can be removed provided with several stab and breast pockets and inner lining made in mesh.
Other characteristics:
Casual hoodie with Kevlar protection for use in the engine. Kevlar panels on shoulders and elbows. Detachable hood. Double closure with zipper and buttons. Two side pockets and one inside, all with zipper closure. Two breast pockets, two buttoned lockable Equipped with removable protection on shoulders and elbows. Mesh lining on the inside.

Imperméable et respirante avec insert intégré Fermeture avec lacets, poche sur la langue pour stocker les lacets, caché des oeillets 2 paires de lacets livrés: 1 noir et 1 en contraste Facile à mettre grâce à une fermeture zippée sur la face interne Bande Velcro sur le devant pour un bon maintien de la cheville Semelle extérieure exclusive anti-dérapants Semelle intérieure antibactérienne Préformées pour s'adapter aux repose-pieds renforts internes et externes sur le renfort malléole et carbon-look sur sélecteur

Specification:Product Name: Grill FrameColor: BlackMaterial: AluminumPlacement on Vehicle: FrontFit:Custom FitGrill Frame Size: 270mm*140mm(LXW)Fitment:(For Reference)For Harley Touring FLHT / FLHR / FLTR / FLHX 2009-2013(Excluding Liquid Cooled FLHTCU and CVO)Note:1. We provide clear pictures, measurements where possible.Please check as much as possible to make sure the item is the one that you need.2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)3. Instruction is not included,professional installation is highly recommended.4. The compatibility is just for reference. Please compare the part No.with your original one before purchasingPackage Included:1 X Grill Frame3 X Bolts