Leatt GPX 1.5 GRipR Bones, gloves

Caberg Drift Evo Storm HelmetThe integral helmet Drift Evo Storm from Caberg offers an even sportier and more aggressive design than the well-known integral helmet Drift. With a completely redesigned lining, the Drift Evo has a good fit and comfort. The rear spoiler increases aerodynamics at higher speeds and reduces turbulence.Features:integrated sun visor easy and quick change of visor Quick Release visor mechanism for fine adjustment of the visor Sight and head ventilation anti-rain profile wind tunnel tested aerodynamics double anti-turbulent neck guard detachable windstopper removable and washable interior equipment high-quality multi-layer coating with UV protection prepared for Bluetooth communication set Specifications:fiberglass 100% polyester lining ECE 22.05 Closure: Double D Weight: small helmet shell (XS-M): 1340g (+/-50g); large helmet shell (L-2XL): 1400g (+/-50g) Contents:1 x Caberg Drift Evo helmet 1 x Pinlock Lens

Der Apex ist ein Ort und einem bestimmten Zeitpunkt. Es ist ein Ort in einer Ecke wo Schräglage, Geschwindigkeit, Zugkraft und Trägheit alles perfekt ausbalanciert sind. Der schnellste und effizienteste Weg fahren führt zu beherrschen. Racer verbringen ihr Leben versucht, dieses eins, Runde um Runde zu meistern.Die Apex-Jacke wurde von diesem Laufwerk inspiriert. Design, Stil, Technik, Funktionen und Konstruktion sind in perfekte Verhältnisse integriert. Das Ergebnis: die leistungsstärksten Sport Touring Jacke jemals angeboten.Bereitstellung von Best-in-Class-aggressive/Sport-Stil, unschlagbare Wetterschutz, beeindruckende Abriebfestigkeit und komplette Auswirkungen Abdeckung, hat die Apex-Jacke alle Ecken abgedeckt.ÄUßERE MERKMALEGARANTIERT, UM SIE DRY® GORE-TEX® 3-LAYER PRO SHELL STRAPAZIERFÄHIGEM NYLON KONSTRUKTION VT10 YKK® VISLON® AQUAGARD WASSERFESTE REIßVERSCHLÜSSE PERFORIERTE ITALIENISCHE LEDER-OVERLAYS AN SCHULTERN UND ELLBOGEN 3M™ SCOTCHLITE™ GRAU REFLEKTIERENDES MATERIAL BIO-BEWEGUNGSERKENNUNG ENTWICKELT REFLEKTIERENDEN PLATZIERUNG DOUBLE FLAP STURMZENTRUM ZIP GEPRÄGTE KLIM LOGO AUF RÜCKEN INTEGRIERTE RÜSTUNG SYSTEM D3O™ T5 EVO PRO XT ELLBOGEN UND SCHULTER STÜCKE ENTHALTEN (MEHR ALS STUFE 1 CE-ZERTIFIZIERUNG FÜR PREN1621-1:2011 ZU TESTEN) D3O™ VIPER PRO RÜCKENTEIL (STUFE 2 CE ÜBERSCHREITET ZERTIFIZIERUNGSTESTS FÜR EN1621-2) EXTERNEN ARM SPANNUNG RIEMEN SICHER RÜSTUNG IN SITU MAX FLOW VENTILATION 2 AUßEN SCHRÄGE BELÜFTUNGSÖFFNUNGEN - VOM FAHRER WÄHREND DER FAHRT BEDIENBAR 2 UNTEREN ARM EINLASSDÜSEN OPTIMALE BELÜFTUNG KONFIGURATION FÜR SPORT TOURING/TOURING MOTORRÄDER MIT GRÖßEREN WINDSCHUTZSCHEIBEN FRACHT, KOMFORT UND PASSFORM-SYSTEME 6 AUßENTASCHEN [2 BRUST, 2 HAND, 1 VERDECKTE RV-BRUSTTASCHE UNTER STURMKLAPPE, 1 UNTERE ÄRMELTASCHE ID/LIZENZ] 5 INNENTASCHEN [3 MIT REIßVERSCHLUSS, 5 MESH STASH, 1 VERSTECKTE PASS POCKET IN LINER] MAßGESCHNEIDERTE SPORT FIT JACKE HOSE GÜRTELSCHLAUFEN UND JACKE, HOSE-REIßVERSCHLUSS (AUSGELEGT FÜR TORRENT HOSE INTEGRATION) AKKORDEON STRETCH LEDER PANEL OBERHALB DES ELLENBOGENS AB MITTE KRAGEN CINCH KABEL UNTEREN SAUM CINCH KABEL

The denim jumpsuit from cult label Queen Kerosin presents itself in a figure-hugging worker look! The trick: the top is removable, so you can wear the pants individually! The style also convinces with cool workwear elements such as the large stitched pockets and the patch pocket on the top. The soft, clean cotton fabric is very robust and ensures an authentic look. Wide contrasting stitching, a diamond embroidery at the back and the adjustable straps complete the style. A great retro combo is created with boots and a classic bandana in your hair! Features
Soft cotton in rinsed wash With side zipper 2-in-1 look with removable top Large pockets on the front

Cheek pads for the following helmet: X-802


cheek pads

helmet Size cushion thickness

XS 35mm

S 30mm

M 35mm

L 30mm

XL 25mm

XXL 20mm

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Universal handlebars, also suitable for motorcycles with hand guards Material
1200D polyester, anti-UV, compliant with ISO 4892-2 regulation, PE padding. Materials compliant with REACH regulation
Other features
Left / right straps with quick release buckles for easy installation Rigid insert to keep the opening open for the wrist Reflective imprints Each handlebar has two attachment points on the handlebar:
1. Exterior: direct attachment to the handlebar using straps and elastic straps 2. Inside: attachment to the handguard with straps (to adjust the position)
Important note: The handlebars are supplied without accessories!