4 Pcs Window Sun Visor Vent Shade Rain Guard Deflectors For Toyota RAV4 2019~2020

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

The slim and functional case protects your smartphone at all times and lets you mount it to the wide variety of SP ConnectTM mounts. Securely mount your phone with the patented twist to lock mechanism when cycling, running, driving, golfing or during other daily activities. Included
1x Phone Case 1x MicroRail Adapter 1x Microrail Adhesive 1x StandTool 1x Landscape MicroRail Link 1x Portrait MicroRail Link
Features
Slim, protective, functional 3-layer case construction for ultimate safeguarding Use of all ports and buttons
*example picture

Description:Material: Grid, CottonSize: 53cm x 57cm/ 20.9'' x 22.4''Color: BeigePackage Include:1pc x Front Seat Cushion(Does not include back row)Features:1.Fit most car seats.2.Comfortable and soft material.3.Breathable mesh cloth.4.Health Keeper, useful to relieve fatigue, quicken metabolism and prevent bacteria.5.Suitable for drivers and office use.Notice:1.Please allow 1-3cm error due to manual measurement.Pls make sure you do not mind before you bid.2.The color may have different as the difference display,pls understand.

Features
Outer shells: 3 Airfit Concept Pinlock® Maxvision Speedview™ Kwikwick3® liner TCT® Thermodynamic Composite Technology New Ellip-Tec® Faceshield System 2 dimensional faceshield equipped with Tear-off pins and Maxvision ready Emergency cheekpads release in order to make easier the removing of the helmet in case of crash Shield lock system: a 3 position lever allows to lock the shield in closed or slightly opened position. Ventilation system: Adjustable, indexed front and rear vents with aero-tuned rear spoiler reduce lift, create vacuum and maximize airflow through helmet. Breath-deflector: Enhanced fog-free performance. Chin-cover: contributes to noise reduction. Closing chinstrap by titanium double D ring.
Airfit Concept Airfit™ permits a rider to personalize helmet fit through air adjustable cheek pads with additional noise reduction.Only by SCORPION EXO! Pinlock® Maxvision Fitting perfectly into the specially depressed area of the faceshield, the Pinlock® creates continuous air pressure through the compression force, which in turn stops condensation – and thus fogging – from occurring even when the temperature difference between the outside and the inside of the helmet increases. Speedview™ An internal retractable sun visor that eases eye strain instantly in varying light conditions without changing face shields. Kwikwick3® liner Very effective, hypoallergenic, removable, machine washable, and very soft and pleasant to the touch, the KwikWick3® lining of the new ScorpionExo® 2015 range is a real custom-made slipper for your head. TCT® Thermodynamic Composite Technology Extremely light, having reduced the weight of the new Exo-1200 Air by nearly 250 g, the new TCT® structure provides a level of protection as yet unseen in the world of helmets. This smart shell is able to gradually crumple on impact, which allows it to absorb most of the energy generated by the shock, while retaining one of the strongest structures. New Ellip-Tec® Faceshield System Launched on the new Scorpion Racing Exo-2000 Air, the ELLIP-TEC® faceshield mechanism further improves the ease and speed of faceshield changes so unique to Scorpion. This operation can be done tool-less within 10 seconds, with the shield open. Wind tunnel designed to minimize wind noise at high speed, fitted with even more powerful springs to ensure optimum fit of the shield against the seal through the compression force, fully sealed and quieter, ELLIP TEC is also stronger to keep the shield in place in the event of a fall.

* Safety level A: abrasion resistance up to 45km/h * Adjustable Safetech Level I protectors against mechanical impact * Lightweight: 50% lighter compared to average motorcycle jeans on the market | Article: Replay Shift Motorcycle Jeans, blue, Size 34 | Article: Replay Shift Motorcycle Jeans, blue, Size 34, blue, Size 34

The SCOTT Obsess ACS sunglasses are your best bet with superlative protection, secure grip, and a sharp look.
Features
SCOTT Fusion Frame No-slip soft nose pads Textured temple pads SCOTT Precision Optics lens quality Impact protection Base 8 ACS Air Control System 100% UV protection Measurements (mm): glass width: 59 glas height: 39 straps: 120 Thermoformed sport case with microfiber bag