30cmx15cm Sheepskin Car Central Arm Rest Box Cushion Universal

Description:1. Non-directional 5 spoke steering wheel2. Universal fits standard 3/4 ( 19 mm ) tapered shaft3. Commonly used on most marine boats, vessels, yacht, pontoon boat and so onSpecification:Material: Made of 304 Stainless Steel W/SS 316 Casting HubS.S. Wheel With Finger Grips And PVC Foam CoverColor: BlackSteering Wheel Outer Diameter: Approx. 343mm/13.5 inchSlant angle : 25Assembly Hub Height: Approx. 40 mm/1.57 inchHub Diameter: Approx. 85 mm/3.35 inchDiameter at the larger opening : 3/4 (19mm)Diameter at the small opening : 2/3 (17mm)Note:Please allow slightly difference due to manual measurement. Color may be slightly different since different monitor. Thanks!Package Included:1 X Marine Boat Steering Wheel with Auxiliary Knob

The Answer Racing AR-1 helmet is our best value helmet ever, all while passing two of the toughest safety standards by exceeding D.O.T. and ECE. A dual-density EPS liner helps to absorb both large and small impacts while a highly developed ventilation system consisting of two large intake ports and four large exhaust ports help keep you cool in the hottest conditions. Features
Meets or exceeds D.O.T. FMVSS 218 safety standard
 Meets or exceeds both ECE 22-05 and D.O.T. FMVSS 218 safety standards Shell made of injection molded Acrylonitrile Butadiene Styrene (ABS)
 Sculptured, dual-density, EPS impact absorbing liner
 Removable/washable liner is made with moisture wicking fabrics
 Flexible rubber nose piece helps deflect roost
 Two large front air intakes and four rear exhaust vents help keep you cool Double-D straps weight ca. 1.43 kg

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

These certified shoes Alpinestars Rayburn are steeped in Alpinestars’ Italian craftsmanship heritage and incorporate a range of the latest developments in comfort, performance and protection features, such as reinforced toe box and heel counter as well as Alpinestars’ exclusive oil-resistant rubber compound sole with new grip pattern design.
Features

Main upper material made with supple full grain leather. Rear leather padded collar offers support and comfort for the Achilles tendon. Alpinestars’ new anatomical backed dual-density TPU ankle disk protection on both sides. Shift pad, ankle and collar soft padding for comfort and flexibility. Toe box and heel counter provide internal reinforcement to give structured support and impact resistance. Internal high modulus polyamide insole with integrated shank reinforcement for structure and support to the arch area. Gusseted tongue to keep out wind, water and grime, plus convenient heel pull-tab loop. Traditional, vintage style metal eyelet lacing system for convenience and secure closure. 3D mesh lining for high levels of breathability with anti-sliding suede patch over heel. Replaceable, anatomical EVA footbed with Lycra lining on top for comfort and convenience. Alpinestars’ exclusive oil-resistant rubber compound sole with new grip pattern design.

Features
Shoulders and elbows protectors pocket for back protector Reflective material Fixed mesh lining Inside pocket Height-adjustable elbow protectors Regular Fit

Specification:Product name: Shift PaddlesMaterial: Metal AlloyColor: silverLength: 12.5cmQuantity: 2pcsFeatures:Upgrade instantly improve extreme visual effect.Exactly fitted for original shifter paddle.The +/- symbols are etched out of the top of each blade.Fitment:For Volkswagen VW GOLF GTI MK7 / GOLF R MK7 / GOLF GTD MK7 / GOLF GTE MK7 2013-20162017 2018Dont For Standard GOLF 7 Version.Only can use for steering wheel DSG + / - function vehicle.Note:1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.2.Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)3.There Are No Instructions Included In This Kit.Professional Installation Is Highly Recommended!Package Included:2 X Shift Paddles