12V 24V Twin Dual Double Port Charger Adapter In Car Socket Lighter For Toyota

Specifications:Color: Black;Gold;SilverMaterial: Satin FabricSize:Front: 45cm x 70cm/17.72 x 27.56inchBack: 45cm x 75cm/17.72 x 29.53inch[Conversion: 1cm=0.3937 inch, 1inch=2.54 cm]Features:-Easy to install, no modification required.-Filter sun light to improve the efficiency of air conditioning and provide higher level of p rivacy.-Exquisite drapery design shows elegance and nobleness.-Strong p lasticity, easy to fit.Package Included:4Pcs/set x Car Window CurtainsFriendly Tips: 1.This is not customized curtains, it only have 2 different sizes(for backfront), so the effect is different for each car.2.Considering the rail viscosity, after install the rails, please install curtain after 24 hours.Note:-Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.-Please allow 1-3CM differs due to manual measurement.-Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.If you have any dissatisfaction or doubt about our products, please feel free to contact us, We will give you a satisfactory solution!Wish you have a happy shopping time!

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

It was thought that the award-winning Sidi Rex Corsa shoe was the pinnacle of recreational boat technology. To this day, Sidi is proud to take the next step in the evolutionary chain: The Vortice. The latest technology, combined with the great skill and craftsmanship of Sidi-based Italian factory technicians, brings together a mix of fresh solutions that meet the driver s desire for safety and comfort. Features
Perforated Lorica construction Teflon ventilated net insert Tecno calf tensioner for leg circumference adjustment Tecno Shin and Tensioner Fiberglass reinforced nylon ankle bandage Shock absorbing heel cup Shin plate rocker Fiberglass reinforced nylon toe slider with aluminum insert and air inlet Polyurethane / rubber composite Racing SRS sole

Strike Gloves
Single layer, lightly padded Clarino® palm and thumb reinforcement Lightweight, breathable and flexible top of hand materials Pre-curved finger sidewalls provide a superior grip Silicone fingertips for increased lever control

Features
900D polyester material in main body for long durability Ergonomically pre-shaped construction for the perfect fit in the driver s position Quad-stretch (TM) front moves with the body on the bike Oversized Active-Stretch (TM) knee panels for unrestricted movement over knee orthoses or protectors Two-layered knees have a highly abrasion-resistant inner side with a heat and abrasion-resistant outer side of leather to prevent premature wear caused by knee braces or protectors Ventilated TPR logo on knee and thigh Fly-Cam closure at the waist

Multi-dimensional functionality for life on the road. Supple sheepskin leather conforms for comfort, integrated plastic knuckle armor for those nasty encounters with the asphalt, and now a Touchtec leather palm to use your touchscreen devices without removal of the glove.
Convenience, Comfort, Crash-worthiness: the Icon PURSUIT TOUCH Glove has just leveled up.
Features:
ToucTec™ Leather Palm Allows You To Use Your Touchscreen Device With Your Gloves On Pittards® Sheepskin Backhand For Great Fit Integrated Knuckle Armor Secure Wrist Closure Keeps The Glove In Place Expansion Gussets To Improve Overall Flexibility Colorway is Goatskin With TouchTech Palm