Thor Terrain S19 Light, textile pants In the boots

Features
Polyester chassis with double and triple reinforced seams Plastic logos and protective inserts for better impact protection High quality sublimation prints Knee protector made of reinforced nylon with high denier number Preformed, ergonomic pants design

Atmungsaktiver Halt mit Performance-Dämpfung - das bietet dieser Trainingsschuh von Nike! Der Nike Air Bella TR Women sorgt mit einer Konstruktion aus ultraweichem Textil und Synthetik für atmungsaktiven Halt. Die leichte Max Air-Dämpfung ermöglicht reaktionsfreudigen Tragekomfort bei Kardio-Workouts, Fitnesskursen oder kurzen Läufen. Die Nike Air Max Story: Das revolutionäre Air-Sole-Element hat 1978 seinen Weg in die Nike Schuhe gefunden. 1987 feierte dann der Nike Air Max 1 sein Debüt - mit einem sichtbaren Air-Element in der Ferse. Plötzlich war der Tragekomfort der Air-Sole nicht mehr nur spürbar, sondern auch sichtbar. Seitdem sind Nike Air Max Schuhe der nächsten Generation mit ihren auffälligen Farbkombinationen und der zuverlässigen, leichten Dämpfung sowohl bei Athleten als auch bei Sammlern sehr beliebt.Eigenschaften: Obermaterial: Textil und Synthetik-LederInnenmaterial: Textil Material Decksohle: Schaum mit Textil-Oberfläche Material Laufsohle: Gummi und PhylonVerschluss: Schnürung Passform: Fällt normal aus  Konstruktion aus Textil mit einem Synthetik-Rahmen sorgt für atmungsaktiven HaltIn das Schnürsystem integrierter Rahmen für anpassbaren, optimalen HaltSchaumstoff-Innensohle (nicht herausnehmbar)Textil-Schlaufe an der FerseSchaumstoff-Mittelsohle mit Max Air-Dämpfung für maximalen Tragekomfort beim Abrollen: Sichtbare Air-Einheit an der FerseAußensohle: Strapazierfähiges Gummiprofil für hervorragende TraktionMultidirektionale Flexkerben für einen natürlichen Bewegungsablauf

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety SHELL in TRICARBOCO material, mix of Kevlar, carbon and fiber, joint through resine, hand made, using new technologies with vinilester resin. The INTERNAL POLYSTYRENE produced in 3 sizes to get the best fitting. This characteristic allows a gradual and progressive absorption of the energy produced by the impact. Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is determinant for the absorption of the residual energy. A diversified density of the polystyrene, permit us to optimize the mechanical performance of the shell/polystyrene. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Ventilation The internal polystyrene has been studied to work together wityh the air ventilations, put on the shell. The channels allow the perfect inside air flow and at the same time a quick outside air flow from back ventilation. Comfort The CHEEK PADS and the INTERNAL COMFORT shell can be removed, washed and replaced.
They are made of a precious fabric with specific fibers, that offer:
It moves away the body sweat, Keeps rider fresh, dry and completely comfortable, Lightweight, soft and breathable fabric, Performance controlled and certified by ADVANSA.
The cheek pads are easily removable also in case of accident through a red strap which removes the cheek pad even if the helmet is worn by the rider.

Material
soft cowhide breathable HEROS®-TEC MESH fabric Contains non-textile parts of animal origin
Lining
mesh lining 3D air mesh panels in back to promote air circulation
Safety
Connecting zip EN 1621-1 certified soft protectors at shoulders & elbows optional EN 1621-2 back protector Velcro for optional chest protector
Comfort
stretch panels on inner arms soft collar stretch leather at shoulders & elbows hip adjustment Held Clip-in Technology internal cellphone pocket front air-vent zipper cuff in stretch material 3 inner pockets 2 external pockets

Features: Flex leather on backbelt and over knees Stretch behind knees Zipped ankles Elasticated waist with front fastening and velcro closure

Outer shell:
outer material: 80% polyester, 15% polyamide, 5% elasthane climate membrane: 57% polyamide, 33% polyurethane, 3% elasthane
Fit / Features:
knitted with 3D seamless technology to clothe without restriction maximum breathability temperature regulating: cool in summer, warm in winter antibacterial & deodorising effect breathable climate membrane to protect critical areas from wind-chill Equipped with Silverplus®