Born from the previous women s glove, Spidi Grip 2 takes all the salient features and elevates them to new standards. Designed on female morphology, as all Fit For Lady products, features silicone inserts on the fingertips to improve grip on the tank of the bike. Features Cowhide leather 0.7 mm thickness Clarino Palm Inserts in stretch fabric Knuckle protection in shock absorbing material Adjustable Velcro Closure
MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows. OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471 CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet. INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part. INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER: Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation. The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses. weigth: ca. 1000gr
Automatischer Sicherheitsverschluss, Kinnteil mit regulierbarer Belüftung, obere Venturi-Belüftung mit Ein-Knopf-Bedienung und schnell demontierbarer Innenausstattung zur einfachen Anpassung. Das sind die Merkmale, welche den Roof BOXER V8 zu einem einzigartigen, sicheren Helm machen.ROOF entwickelt den Kult-Helm BOXER ständig weiter. Mit Doppel-Zulassung als Integral und Jet, ermöglicht nun auch die neue bi-axiale Kinnteilführung das Auf- und Zuklappen des Kinnteils bei geschlossenem Visier. Die Helmschale des 'BOXER V8' aus Composite - Material erfüllt höchste Ansprüche. Das Innenfutter aus Mikrofaserstoff ist herausnehmbar und waschbar, die Wangenpolster austauschbar. Das typische ROOF-Visier Antifog mit höchster optischer Qualität ist kratzfest und leicht getönt.Helmschale aus Glasfiber Venturibelüftung oben Kinnteil mit regulierbarer Belüftung automatischer Sicherheitsverschluss des Kinnteils beschlagfreies Visier Innenfutter herausnehmbar Wangenpolster austauschbar Schnellverschluss
Jacke aus Vintage Leder im Used-LookPRODUKTMERKMALEKariertes Baumwoll-Innenfutter Reissverschlüsse mit automatischer Arretierung am Ärmelstulpen 4 Aussen- und 2 Innentaschen Hüftversteller Schlaufe zum Verbinden mit der Gürtelschlaufe der Hose Höhenverstellbare Schulter- und Ellbogenprotektoren Tech90 (TP-02), Bauart geprüft nach EN 1621-1:2012, Level 2 Tasche für Rückenprotektor (Rückenprotektor PROTECT V2 (X99557), Bauart geprüft nach EN 1621-2:2014, Level 1 optional nachrüstbar) GRÖSSENHerren 48 - 60 MATERIALObermaterial: Büffelleder Futter: 100% Baumwolle Armfutter: 100% Polyester Enthält nichttextile Teile tierischen Ursprungs
Internal certified back protector for Fit for Lady items. It is certified for heights up to 156cm. Under current legislation, this protector provides protection to all areas of the body, and is therefore suitable for use within the above measurements. The structure of Back Warrior Z64 is a multi layered sandwich of materials, the first one of which is stiff and spreads the shock, while the second and third are progressively softer and absorb the energy of impact. The cubes shaping the inner and outer surface of Warrior Back are able to absorb and additional 20%of impact energy more than a simple plain surface, all while maintaining a great abrasion resistance. The inner surface has also been shaped in order to guarantee air circulation thus maintaining comfort, especially in warm climates. The peculiar shape and surface structure also make for a greatly flexible and light protector, easily storable, quick to equip and comfortable for every kind of riding position. Measures: H 35cm - L 26cm
The XL lens shape takes performance even further with an enhanced vertical dimension. Even when your head is subtly tilted downward, things that matter will still be in your field of view. That makes it a great choice for activities like cycling. The slightly taller design also enhances performance in sports and activities where things above need careful attention. Features The XL edition offers enhanced lens coverage and specialized lens curvature for protection against sun, wind and impact Unobtainium® earsocks and nosepads increase grip with perspiration for a no slip grip Interchangeable Lenses let you change lenses in seconds to optimize vision in any sport environment Plutonite® Lenses offer top UV Protection filtering 100% of all UVA, UVB, UVC and harmful blue light up to 400nm O Matter™ stress-resistant frame material is both lightweight and durable for all-day comfort and protection High Definition Optics® High Definition Optics® (HDO®) is a collection of patented technologies that allow Oakley eyewear to meet or exceed the testing standards of the American National Standards Institute for optical clarity, visual fidelity, and impact resistance. UV Protection Eye damage attributed to ultraviolet light includes cataracts, pterygium and macular degeneration. Our Plutonite® lens material filters out 100% of all UVA, UVB, UVC and harmful blue light up to 400nm. The protection is from the lens material itself
