AIMO AMS8211D Pen-type Auto Range Digital Multimeter DMM Ammeter Voltmeter Ohmmeter w/NCV & Logic Test

Hauptmerkmale Funktionen Produktfarbe Silber Gewicht & Abmessungen Länge 14,5 cm Breite 3,5 mm

Witte screwdriver bits are made to very exacting standards to ensure maximum transmission of torque to the screw by a special hardening process and an exact fit of the bit to Phillips screws. In addition there is a special recessed neck called the Flex-Zone which absorbs shock loads thus giving increased durability. There is also a special coating of titanium nitride which increases the wear resistance of the Bitflex Phillips.Witte Phillips Titanium Coated Screwdriver Bits Size: Phillips No.1pt.Length: 25mm.Drive: 1/4in Hex Drive. Pack Size: Card of 2.

Number punches are for marking metals and other solid materials. Produced from quality steel, heat treated and nickel plated to give maximum endurance and accuracy of impression. Set contains 0-9 with the latter inverted to double up as a 6. Packed in attractive plastic box.Size. 2mm (5/64 in).

Eigenschaften:EineAnzeigemitgeteiltemBildschirm.In der oberen Anzeige können Sie die Spannung, den Strom (mit Schleifenleistung), den Widerstand und den Durchgangstest messen. Im unteren Display können Sie Volt, Strom, Widerstandstemperaturfühler (RTD), Thermoelemente (TC), Frequenz und Ohm messen und erzeugen.KalibrierteinenSendermithilfedesSplit-Screens.DieMessungdesThermoelementsermöglichteine automatische Referenzverbindung.AutomatischeundmanuelleKaltendtemperaturkompensationfürTC.ManuellesTretenundautomatischesTretenund Rampen.SuperstarkerSchutz:DerwasserdichteGradist IP67. Automatischer Schutz gegen die Signalklemmen, an die 220 V anzuschließen.UnterstützungfürdiePC-Kommunikation.Genauigkeit:0,05% Spezifikation:FunktionMessenQuelleDCV0~50V(dieobereAnzeige± 30 V)0~10VGleichstrommA0~24mA(dieobereAnzeige±24mA)0~24mAFrequenz1.000Hz ~ 100.00kHz0.00Hz~20.000kHzWiderstand0~3200Ω0~3200ΩDCmV0~100mV(dieobereAnzeige±200mV)0~100mVRTDPt100,Pt1000,Cu50,Cu100Pt100,Pt1000,Cu50,Cu100TCE,J,K,T,B,R, S, NE,J,K,T,B,R, S, NAndereSchleifenversorgung,Schritt,Rampe,DoppelanzeigeKlickenSiehier,umdas englische Benutzerhandbuchherunterzuladen Lieferinhalt:1xETX-1825Multifunktions-Prozesskalibrator DetailsBilder:

These Forgefix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use.Size: 4.5 x 70 mm.Box quantity: 100.

The Rawplug Professional Impactor Heavy-Duty Masonry Drill Bits have been designed for use with rotary hammer action drills. The shatterproof tip is made of special grade Tungsten Carbide for peak performance and long life, whilst drilling concrete, engineering bricks and hard masonry.Size. 14 mm x 300 mm.