Nexx SX.60 Smart 2, jet helmet

Specification:Color: ChromeMaterial: ABS PlasticPlacement on Vehicle:Left, Right, Front, Rear (ONLY FIT LEFT DRIVER CAR)Quantity:8 pcs/set (4 long pieces + 3 short pieces with no keyhole + 1 short piece with keyhole)Fitment: (ONLY FIT LEFT DRIVER CAR)For Mazda 2 (DJ/DL) 2015-2017For Mazda 3 (BM/BN) 2014-2017For Mazda 6 (GJ/GL) 2013-2017For Mazda CX-3 (DK) 2016-2017For Mazda CX-5 (KE/KF) 2013-2018Features:-No cutting or drilling required.-Weather-resistant with long lasting.-A perfect aftermarket replacement.-Easy Peel-N-Stick installation.Adhesive tape included.-Easy remove without any residual, never harm the painting of your car.-Made of high quality ABS with chrome color surface finish,which can upgrade your cars personality.Package Included:1 X 8 pcs/set

Description:The product displays driving datas on the front windshield, such as speed,on the car front window glass, avoiding drivers unsafety because of watchingthe instrument while driving. Drivers can read the driving information instantly,and can always keep the best state on the way with HUD.5.8-inch HD display screen.Combine OBDGPS HUD system into one, free switch.Freely switch between OBD and GPS modes.The use of nano-technology to eliminate unwanted reflections and can make display information more clear.Display rich content: speed, engine speed, water temperature, battery voltage,low voltage alarm, high temperature alarm, speed alarm, free switching between kilometer and mile.Automatic and manual brightness adjustment mode, bright in day time and not dazzling in night time.Notice: 1.Open the engine hood and find the paster below it (see the picture below),if it has words like OBD II CERTIFIED, then it can be installed. You should affix the pasterin the HUD display area, it can refrain strong light, brings better display effects when HUD working.2.Know the type of your vehicle. When purchasing HUD, you need to choose thetype of vehicle that meets the OBD II standards for normal use. Any US Vehicle 2004 or laterwill have an OBD2 port to use with the display. Outside the United States vehicle after 2008will have an OBD2 port to use with the display.Specification:Screen: 5.8 inchWorking Voltage: DC9-16V (DC12V 400mA)Environment Temperature: -40 degree centigrade ~ +80

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Kurzinfo: Brodit Active holder for fixed installation - Fahrzeughalterung/Ladegerät - Schwarz Gruppe Zubehör Hersteller Brodit Hersteller Art. Nr. 527620 EAN/UPC 7320285276208 Produktbeschreibung: Brodit Active holder for fixed installation - Fahrzeughalterung/Ladegerät Produkttyp Fahrzeughalterung/Ladegerät Vorgesehen für Handy Geeignet für Installation Auto Produktmaterial ABS-Kunststoff Farbe Schwarz Ausführliche Details Allgemein Produkttyp Fahrzeughalterung/Ladegerät Vorgesehen für Handy Geeignet für Installation Auto Produktmaterial ABS-Kunststoff Farbe Schwarz Verschiedenes Besonderheiten Neigung, verstellbare Breite, verstellbare Tiefe, Schwenkfunktion

Features: High performance 5W driver wireless BT speaker with rich bass, which will provide you an excellent music experience. Built-in microphone for convenient hands-free call, easy for you to answer/hang up the incoming phone calls. Built-in LED mood light, which will bring cool and attractive lighting effect, helping enhance the music atmosphere. Supports FM radio, providing you much convenience to know all kinds of news. Shockproof, dust-proof and IPX7 waterproof, allowing you enjoying music on the beach, by the swimming pool even in the shower, no need to worry about your speaker getting wet. It can stick firmly to your shower wall, mirror, kitchen counter, pool deck or any slick surface through its suction cup, very convenient to use. Easy to use, widely suitable for almost all BT-Enabled devices, such as, smartphones, tablets, laptops and other BT-Enabled devices. Mini and compact size, easy to carry. Perfect for enjoying your favorite music while camping, hiking, picnicking, fishing, etc.

Kurzinfo: Caliber DVR110 - Kamera für Armaturenbrett - 1080p / 30 BpS - 1.3 MPix - G-Sensor Gruppe Camcorder & Digitalkameras Hersteller Caliber Hersteller Art. Nr. DVR110 Modell DVR110 EAN/UPC 8714505044378 Produktbeschreibung: Caliber DVR110 - Kamera für Armaturenbrett Produkttyp Kamera für Armaturenbrett - 1080p - Breitbildformat Speicherkartensteckplatz microSD-Karte Sensoren G-Sensor Sensorauflösung 1.3 MPix Max. Videoauflösung 1920 x 1080 Objektivsystem Weitwinkelobjektiv 2 mm f/3.2 Fokuseinstellung Fixfokus Display LCD-Display - 5.8 cm (2.3"") Vorfallerkennung G-Sensor Unterstützte Batterie 1 x 200 mAh (inbegriffen) Schnittstelle HDMI, USB 2.0 Ausführliche Details Allgemein Produkttyp Kamera für Armaturenbrett - 1080p Sensorauflösung Camcorder 1.3 MPix Anz. Sensoren 1 CMOS Interpolierte Fotoauflösung des Camcorders 5.0 MPix Widescreen-Videoaufzeichnung Ja Typ des optischen Sensors CMOS Bildrate (max. Auflösung) 30 BpS Sensoren G-Sensor Digital-Video-Format MOV Bildaufnahmeformat JPEG