Kitchen faucet - Two Handles Two Holes Chrome / Oil-rubbed Bronze / Nickel Brushed Pull-out / shy;Pull-down Centerset Antique Kitchen Taps Lightinthebox

The DMT D9 Diamond sharpening bench whetstone has non-slip feet and will not break, chip, crack, hollow or groove. The D6 whetstone is made from the hardest material which is one of the most efficient sharpening abrasive. Available in unique interrupted surface and continuous surface, light pressure produces a sharp edge with just a few strokes. Use water for lubrication no oil, smell or mess and can hone ALL hard materials: carbide, steel, etc. and is supplied with Non-skid mat. Precision, continuous monocrystalline diamond bench whetstones with rubber feet. The grit size is etched into the side of the whetstone. The grits are denoted by a dual coloured circle which is set into one end. Blue: Coarse Grade 325, 45 micron.Red: Fine Grade 600, 25 micron.Green: Extra Fine Grade 1200, 9 micron.Red: Fine 600g, 25 micron

The Carver Medium-Duty Rack Clamps have a variety of uses. The most common include welding, metal fabrication, moulding box and die holding, plate fabrication, plastic and fibreglass moulding and maintenance work.The Carver T290-450 Medium-Duty Rack Clamp has the following specification: Capacity: 450mm (18in).Reach: 90mm (3.1/2in). Overall Length: 655mm (25.3/4in).Clamping Force: 1,800N.Weight: 7.0kg.

The DEWALT DWS520KT Heavy-Duty Plunge Saw has full wave electronics that maintain a constant speed under heavy load and the variable speed allows you to select the correct speed depending on the material you are cutting. The anti kickback function stops the saw from moving backwards along the rails and helps stop the saw from climbing out of the work piece when making plunge cuts. The parallel plunge allows the user to maintain a smooth and constant hand position while cutting and the included 48 tooth blade gives a fine and accurate finish with very little breakout in laminates. The rail adjustment allows the saw to be adjusted accurately to the rails and it has a 55mm depth of cut that allows the trimming and sizing of most common door sizes. The enclosed guard gives a 90% dust extraction capability. Specification: Input Power: 1,300 Watt.No Load Speed: 1,750-4,000/min.Blade: 165 x 20mm Bore.Bevel Capacity: 47°.Depth of Cut: @90º: 59mm, @45º: 44mm.Depth of Cut With Guide Rails: @90º: 55mm, @45º: 40mm.Length: 303mm.Height: 265mm.Weight: 5.1kg. The DEWALT DWS520KT Heavy-Duty Plunge Saw 1300 Watt 240 Volt Version.

Irwin Snub Nose Bi-Metal Safety Knife Blades The snub nose blade design helps to reduce the risk of accidental puncture wounds. Shatterproof bi-metal blades combine the best of two metals, electro-welded together for superior performance and safety. Bi-metal blades stay sharp up to 3 x longer than carbon steel blades.Irwin Snub Nose Bi-Metal Safety Knife Blades.Qty: 5

Featuring a high performance 4-pole motor delivering maximum power whilst optimising the power to weight ratio, the Milwaukee HD18 AG 115mm Angle Grinder has a full metal gear case for heavy-duty durability. Including REDLINK™ overload protection electronics in both the tool and battery pack to deliver brilliant system durability, the design includes a reduced height of the gear box and slim girth providing optimum ergonomics for comfort. There is also an exclusive paddle switch design and multi-position side handle helping improve usability and efficiency.#Bare unit no batteries or charger supplied.

Double ended screw removers for use with a reversible drill to remove damaged screws, machine screws and broken bolts from wood, metal and plastic. This set can be used on Pozi, Phillips, Slotted, Hexagon, Torx, Tri-Wing, Frearson and most Tamper Resistant Screws.