Thor Guardian MX S18, protector vestv kids

Description:Environmental protection and high temperature.The use of environmentally PC material has good heat resistance can effectively prevent the damage the internal material.High quality, Long-lasting, On/off faster response time, Super brightEasy installation, no modification requiredThe tail,brake and turning signals are all integrated in oneSpecification:Material: ABS PlasticLens Color: ClearThe position: AfterLight color: pictures showSize: pictures showBefore ordering, please ensure that this part is suitable for your motorcycleDecoration:FOR Kawasaki Z1000, 2014, 2015, 2016Package Included:1 X Motorcycle Tail Light

Specification:Color: ClearModel: 926588Material Type: Glass SteelSticker Placement: InternalDimension: Approx 232 x 112mmExternal Testing Certification: CEThickness:[Glass + release film] = 0.3mmYear:For Peugeot 3008 4008 5008 2017 2018Product Name: Navigation Screen Steel Protective FilmFeatures:1.0.3mm slim experience,keep touching sensitive, better smooth touching feeling.2.9H hardness: Anti-explosion, Anti-oil; Automatic Adsorption, No residue when removed.3.The tempered film contains an oleophobic and waterproof layer that can be restored with just one rub.4.The product is scratch-resistant, waterproof, oil-proof, explosion-proof, ultra-thin, and highly transparent.5.Ninety-nine percent high light transmission, HD reduction.High definition give you a clear and true using experience.6.Just clean the screen, align it and put it down, the film can be automatically adsorbed, no bubbles left, easy to operate.7.The use of advanced explosion-proof technology to strengthen the hardness, can effectively reduce the impact, reduce scratches.Even if it breaks, it will not produce debris, it is safe to use.Fitment (For the reference):For Peugeot 3008Note:1.Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)2.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.3.There are no instructions included in this kit.If you want to know how to use or install it please contact us by email

strapazierfähiges Rindnappaleder anilin Innenhand aus Känguruleder Schoeller®-Keprotec®-Verstärkungen vorgekrümmte Finger Stretcheinsätze zwischen den Fingern und an den Seiten Sturzpads atmungsaktiv

Incorporating microfiber for excellent levels of breathability, comfort and durability, the Centre Riding Shoe sets a new benchmark in road riding footwear, offering optimized levels of performance and a uniquely aggressive design. Features
Casual riding shoe inspired by Alpinestars automotive technology and optimized for motorcycling. Main upper material is a soft, lightweight, durable and abrasion-resistant microfiber. Lateral and medial TPU double density ankle protector disks are layered under the upper and backed by foam padding for rider comfort. Secure and convenient closure, giving an adjustable fit with a lacing closure system combined with welded eyelet reinforcements. External TPU heel stabilizer ensures additional support. Full mesh lining with anti-slip micro suede reinforcement on heel area keeps foot securely in position while riding. Internal toe box and heel counter protection is layered under the upper. Tongue and collar padding provides high levels of comfort and fit around the ankle and instep. Replaceable anatomical EVA footbed with mesh lining on top for high levels of breathability. New and extremely lightweight sole design with Alpinestars exclusive non-slip for more grip, excellent absorption and an integrated support shank for enhanced sole rigidity. Hidden PU foam midsole offers increased cushioning. Centre riding shoe is certified to EN 13634:2017.

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Features
Shoulders and elbows protectors pocket for back protector Reflective material Fixed mesh lining Inside pocket Height-adjustable elbow protectors Regular Fit