Pro'sKit PD-372 Mini tornillo de Banco Mesa Vice Banco de trabajo para DIY joyería artesanía molde fijo herramienta de la reparación (mandíbula apertura de 25mm)
Pro'sKit PD-372 Mini tornillo de Banco Mesa Vice Banco de trabajo para DIY joyería artesanía molde fijo herramienta de la reparación (mandíbula apertura de 25mm)
Pro'sKit PD-372 Mini tornillo de Banco Mesa Vice Banco de trabajo para DIY joyería artesanía molde fijo herramienta de la reparación (mandíbula apertura de 25mm)
The Britool 1/2 inch drive 12-point sockets (metric) are crafted from chrome vanadium steel and finished in high chrome. The OGV® profile allows tightening torque to be applied to the sides rather than to the angles of the nut. This product is for manual use only. ISO 2725-1, DIN 3124, ISO 1174-1, ISO 1711-1, ISO 691.The Britool BRIE117054B Socket 12 Point Standard 1/2 inch Drive 11mm has the following dimensions:Size: 11mmLength: 38mmWeight: 50g
The band clamp is suitable for assemblies made of wood, plastics and non-ferrous metals, but it can also be used with ferrous metals when firm all-round clamping which will not damage or distort the work is required. Because the tape is tightened evenly from both sides, pressure is uniformly distributed all round or at each corner, thereby preventing distortion on one side. Self locking occurs automatically as the strap is tightened. This ensures consistent tension, which is maintained until the strap is released. The Vario-angle adapt automatically and infinitely variably to any angle from 60° to 180° . Clamping Range Up to 7mBand Width & Depth 25mm x 1mm Angle 60 / 80 DegreesWeight: 0.53Kg
The Weller 18 Volt WHS40 Temperature Controlled Solder Iron has a temperature range of 200 - 450°C and eliminates the risk of heat spikes commonly associated with stations without temperature control. Equipped with an 18 Volt low voltage iron with an ergonomic handle, allowing the user to comfortably get closer to the job at hand. Specification Input Power: 18 Volt.Temperature: 200-450°C.Tip: T0054321199, S32 Solid Longlife Tip 2.mm, SI15/SPI16.Weight: 1.48kg.
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 25 mmD = 20 mm 25/32in
Faithfull aluminium oxide abrasive on a flexible paper backing with the added convenience of the hook and loop quick change system. Suitable for use on wood, metal, plastics and filler. Pattern: Plain.Diameter: 125mm. Assorted grits.