3PCS 6000K LED Car Tail Light Number Plate Light Waterproof Lamp for Truck Trailer Boat

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

The Answer Racing AR-1 helmet is our best value helmet ever, all while passing two of the toughest safety standards by exceeding D.O.T. and ECE. A dual-density EPS liner helps to absorb both large and small impacts while a highly developed ventilation system consisting of two large intake ports and four large exhaust ports help keep you cool in the hottest conditions. Features
Meets or exceeds D.O.T. FMVSS 218 safety standard
 Meets or exceeds both ECE 22-05 and D.O.T. FMVSS 218 safety standards Shell made of injection molded Acrylonitrile Butadiene Styrene (ABS)
 Sculptured, dual-density, EPS impact absorbing liner
 Removable/washable liner is made with moisture wicking fabrics
 Flexible rubber nose piece helps deflect roost
 Two large front air intakes and four rear exhaust vents help keep you cool Double-D straps weight ca. 1.43 kg

Description:Brand New Horn Snail Compact AirhornVoltage:12VColor:BlackSize: 12X11x4.8cmPart Number: 007Easy to installIt requires only one fixing pointNo air tubes neededNo external air supply neededFitment:Fit For Car ,Vehicle ,Motorcycle,Yacht,Boat,SUV, Bike,ectInstallation Note:Connected directly to the battery relayIf you have not connected the horn relay,Can cause electrical problemIt is recommended to use 20A-30A FuseMounting angle downward,so that moisture can not collect in the hornIf no sound or strange sound ,check the horn -wire (+/-)Connect the grounding cable to avoid sparkDisconnect the ground cable first removeBe careful not to put too close to the chassis of the horn-trumpe trattling noise reductionPackage included:1 x Air Horn1xRelay

Features
Waterproof and breathable thanks to the soltoTEX® membrane Textile lining Comfort foot bed 2 zippers to make it easier to put on the boots Reinforced heel cap Stretch insert on the calf Inner boot with neoprene on the top for more comfort Reflective insert on the heel Plastic inlays on ankle and shin section Abrasion-proof rubber sole Gear lever protection made of rubber Safety: in accordance with the standard EN13634:2015

* Premium cotton * aramide fibre twill lining * Fixed mesh lining for improved breathability | Article: Merlin Vixen Ladies Motorcycle Hoodie, black, Size S for Women | Article: Merlin Vixen Ladies Motorcycle Hoodie, black, Size S for Women, black, Size S for Women

60 second sonic cleansing brush for superior facial cleansing luxury soft brush head 2 speeds to suit different skin types usb rechargeable waterproof - ipx8