Features 3 modes of lighting: on the back of the unit there is a sliding switch with 4 positions1. Off. Unit off all of the time2. Uses the dusk to dawn sensor only, so the unit will come on at medium power when light levels drop and the lights will stay on as long as there is power in the batteries. Fully charged this will be several hours3. Uses dusk to dawn and pir motion sensor: at dusk the light will come on in low lode to provide basic lighting but if the sensor detects movement then it will switch to full power. If no further movement is detected then it will revert back to low power after 30 seconds4. Motion mode only: unit is off all the time unless it sees movement then the light will come on full power for 30 seconds. It will stay on as long as there is movement, then go off after 30 seconds.Specifications: Solar panel: 1W/5.5V Wattage:5.5W Lumen:550lm LED Quantity: 66 pcs Waterproof Grade: IP65BATTERY: 1 x 18650 2200mAh Lithium Battery (Customer replaceable with care - Remove the 5 small screws on back of unit and then the back cover can be carefully prised away - the battery can then be replaced with a good quality 18650 Li-Ion rechargeable type which should be easily found. Good to know if and when the unit stops working at some point down the road - many other solar units do not have this feature!!Wide 140 Degree Motion Sensor Angle Higher Power Efficiency Up to 17% photovoltaic conversion rate achieves efficient charging. Sensor Working Distance up to 8M Dimensions Unit Width 17 x Height 10.5 x Depth 6.5 cm Weighs approx 240 Grams (so not heavy at all!) Functions: Light Mode: Medium Light Mode/Dim Light Mode/Sensor Mode Lighting Time: 8-12 hours in Medium Light Mode; around 200 times of sensoring in Dim Light Sensor Mode and Sensor Mode after fully charged. Whats in the Box:66 led solar light x 2 screws and rawlplugs x 2 Sticky pads
Features:
Adopt 320*240 2.4 TFT color LCD display, simultaneously display parameters of CH1 and CH2.
Ability to reproduce patterns of custom waveform.
Use soft silicone keys instead of traditional patch keys, high sensitivity and convenient for operation.
Using DDS direct digital synthesis technology to generate precise, stable and low distortion output signal.
Max. output frequency(sine wave) up to 15MHz/30MHz/60MHz(Optional), 266MSa/s sampling rate and 14bits vertical resolution.
Completely independent dual channels output, synchronizing operation and adjustable phase difference.
Great improvement for square wave performance, square frequency range up to 15MHz with no distortion.
60 groups of arbitrary wave storage function, memory depth of each group is 2048*14bits.
High frequency accuracy and resolution: frequency accuracy up to 10^(-6) magnitude, total range frequency resolution is 0.01uHz.
High amplitude resolution: the minimum amplitude resolution can reach 1mV, amplitude range is 0Vpp~20Vpp.
Duty-cycle of each channel can be adjusted independently, the adjusting resolution is 0.1%.
Sweep function: linear sweep and logarithmic sweep functions; 0.1s-999.9s sweep time; forward, backward and roundtrip sweepdirections.
With pulse trains burst output function: allow the unit output 1~1048575 arbitrary pulse trains.
Measurement functions: can measure signal frequency, cycle, positive/negative pulse width and duty cycle; 1Hz~100MHz frequencyrange.
-9.99V~9.99V DC offset range, offset resolution: 0.01V.
With digital signal output function, CMOS output range 0~10V.
Storage feature: can store 100 groups of parameters set by the user and extract at any time.
Counter function: with DC and AC coupling modes.
Arbitrary wave editing function: user can edit arbitrary wave on PC and then download to output from the instrument.
Communication function: the PC can be used to control the instrument.
With output short-circuit protection: all signal output can work 60s under load short-circuit condition.
Specification:BrandMecArmyLED3 xXP-G2ReflectorSMOMax output1200 lumensMax run time40hMax beam distance218mMax beam intensity12002cdBattery16340 or 18350 Li-ion batteryLength79mm / 3.11inchHead diameter34.3mm / 1.35inchBody diameter22.5mm / 0.88inchWeight101gFeatures:High efficient smooth reflector.16340 lithium ion battery.One handed operation.Temperature monitoring.Tail stand capability.IPX8 water resis.Pakeage includes:1 x Flashlight1 x User manual1 x 16340 battery1 x Leather holster1 x O-ring1 x Lanyard
Features:
ON/OFF button on the top and the Man/Auto switch on the side. When in Auto position it is controlled by sensitive PIR motion sensor, but in Man it works with the ON/OFF.
Wide range of induction distance is 3-5 meters and its sensing angle is 120.
30pcs SMD2835 superb quality LED beads, long lifespan, flicker-free and anti-glare light without strobes and radiation, it can keep your eyes away from exhaustion.
IP65 Water resistance for providing you a better experience.
Equipped with strong adhesive both on the back of remote control and LED strip allow you to quickly mount it wherever you need. It can also be cut to the length you needed by cutting on the yellow mark line.
Be widely used at closet, cabinet, wardrobe, cupboard etc.
