Monument 2363L OMAT Soldering Mat 15-22mm 6 x 6 inch

These Forgefix Through Bolts (also known as Wedge Anchors or Toothless Anchors) have a Zinc Yellow Passivated finish for durability and corrosion resistance. They are through-fixing, and extremely economical and quick to install. APPLICATIONIdeal for fixing brackets, cladding, restraints, racking, fabricated stairwells and industrial doors.Ensure the correct socket drive or spanner is used to ensure accurate installation. The Zinc Yellow Passivation process of electroplating is similar to the Galvanised and Zinc Plated processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion.Through Bolt Zinc Yellow Passivated M16 x 105 Bag 5

IRWIN Vise-Grip Groovelock Waterpump Pliers have an all-purpose jaw that can grip onto flat, round, hex and square work pieces. The multi-groove ratcheting system has twice the number of groove positions compared to traditional groove joint pliers. A press-n-slide button adjusts the jaws twice as fast as traditional groove joint pliers. Anti-pinch non-slip grips provide control, comfort, and less hand fatigue.These Irwin ;Vise-Grip Groovelock Waterpump Pliers have the following specifications: Capacity: 114mm.Length: 400mm (16in).

The Wera Slotted 160i VDE insulated screwdrivers are tested individually for dielectric strength under a load of 10,000 volts so as to ensure safe working with loads up to 1,000 volts. They have a premium lasertip which is a laser roughened surface that literally bites into the screwhead, reducing cam out. With patented ergonomic, multi component Kraftform handle which uniquely fits to the shape of the hand during screwdriver use. Please note: WER006100 does not have a Lasertip.Blade Length, 150mmTip, 6.5mm

The Zenith Satin Mop is suitable for satin finishing work. It gives a satin or brushed finish to all metals.The ZENSFM62W Satin Mop has the following specifications:Grade: Medium.Size: 6 x 2in.

These Forgefix double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting. APPLICATION:Used in many applications other than roofing, when joining products together.Use clearance drill sizes 1mm larger than bolt diameter. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. With slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.Roofing Bolt ZP M6 x 70 Bag 25

The DEWALT D25133K SDS 3 Mode Hammer Drill is ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 26mm in diameter. It has a rotation-stop mode for light chiselling applications in brick, soft masonry and occasionally concrete. It also features an impact-stop mode for drilling in wood, steel, ceramic and screwdriving applications. The drill has a mechanical clutch that eliminates sudden high-torque reaction, should the bit jam. It features electronic variable speed for total control in any application. The ergonomic rubber coated back handle and industrial design provides easy and comfortable handling in any application. Suitable for the following applications: Drilling holes in solid masonry, concrete and stone from 4 to 26mm in diameter to various fixing. Drilling through holes in masonry to house pipes and cables. Light chipping in brick or masonry Tile removal from kitchens and bathrooms. Small channelling in brick. Mortar and plaster removal. Some drilling in wood and steel. Specifications: Mode: Rotary, SDS Hammer, Chisel Only. Input Power: 800 Watt. No Load Speed: 0-1,500/min. Impact Rate: 0-5,550/bpm 2.6 Joules. Capacity: Wood: 30mm, Steel: 13mm, Concrete 26mm, Core: 50mm. Toolholder: SDS-Plus. Weight: 2.3kg.