Abus E60NP Nickle Pearl Z40/K40 C Thumbturn Cylinder

The Rawplug Frame Fixings for fixing timber or metal window and door frames to concrete, stone, brick or blockwork. Quick and easy to use, no marking out, drill straight through frame. Anti rotation lugs prevent rotation of fixing during tightening. Tough nylon sleeve prevents frame distortion during tightening.Size. 10 x 120mm.Maximum Fixture Thickness: 70mmQty. 50.Complete with Screws

Markal Dura-Ink are permanent, smear and water resistant heavy-duty felt tip markers with versatile bullet (15 and 55) and chisel tips (25), and are used in a wide variety of industrial applications. They mark on variety of surfaces inculding metal, wood, plastic, glass, rubber, cardboard, paper etc.Tub of 48

The Faithfull Post Hole Digger has a heavy-duty, all steel welded construction with large wide opening blades. It also has a compound scissor action, close the handles to close blades and thus remove the soil.

Master Lock classic brass padlocks are a tough and reliable security solution. The solid brass body has a modern diamond shaped design and a brushed finish. The extensive range of brass padlock options means there is a Master Lock brass padlock for just about any need. Each padlock has a solid body, hardened steel shackle and dual locking levers. A variety of multi-pack options, where all padlocks in the pack open with the same key (keyed alike) is also available. Padlocks are available with 4-pin, 5-pin or 6-pin cylinders and with a variety of shackle lengths for added security and for a wider range of possible application options. All Master Lock padlocks are supplied with a minimum of 2 keys and a Lifetime Warranty against mechanical failure. Suggested Uses: Gates, containers, storage units and sheds.The Master Lock 160EURD has the following specifications: 60mm solid brass padlock - 30mm hardened steel shackle, 9mm diam. - 5-pins

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 4.0mm (5/32 in)

The Lessmann DIY Cup Brush is fitted with 6mm shank. It has been designed for working on large surfaces, generally for the removal of rust, paint, dirt or scale, and for polishing. 430.123.07: Wire: 0.35 Steel, Diameter: 50mm.430.133.07: Wire: 0.35 Steel, Diameter: 75mm.430.126.07: Wire: 0.25 Brass, Diameter: 50mm.The Lessmann DIY Cup Brush has the following specification: Wire: 0.25 Brass.Diameter: 50mm.Max/Min: 4.500.