Thor Combat Youth Motocross Goggles, pink, pink

* Fit: Regular * Aramid reinforcement * stretch | Article: Overlap Carpenter Motorcycle Jeans, black, Size 36 | Article: Overlap Carpenter Motorcycle Jeans, black, Size 36, black, Size 36

Specification:Product NameRear Window WiperBlade Size44cmArm Size37cmPlacement on VehicleRearColorBlackQuantity1 SetFitmentFor Land Rover Freelander MK1 1997 - 2007Package Included:1 X Wiper Blade1 X Wiper Arm

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Equipment: Classic 5-pocket style without knee joint Customizable leg length Hip and knee protectors retrofit
Material: about 1.2 mm thick cowhide Lightweight lining
Upper: 100% leather
Lining: 100% polyester

These Forgefix cable ties are suitable for a range of different uses. The ties have a temperature range for continuous use from -40°C to 85°C. Application:These cable ties are suitable for many uses, including gardening, electrical installations, sign installation, point of sale applications and much, much more. They effectively bind and organise several cables or wires together. The cable tie consists of a tape section with triangular teeth that slope in one direction, as in a ratchet mechanism. The head of the cable tie has a slot with a flexible pawl that rides up the slope of these teeth when the tape is inserted. Once the pointed tip of the cable tie has been pulled through the case and past the ratchet, it is prevented from being pulled back; the resulting loop may only be pulled tighter.Cable Tie Natural / Clear 4.8 x 200mm Box 100

Acerbis X-Factory HandschützerGeschlossener Handschutz Stahlbar auf der Oberfläche in verschiedenen Farben gedruckt Anticorodalarmbänder, um den Handschutz am Lenker zu befestigen Stahlexpander für engere Befestigung und gegen Drehung im Falle eines Aufpralls Doppel-Injektionsabdeckungen Anwendung: auf Lenker mit Innendurchmesser von 13,5 mm bis 16 mm und Außendurchmesser von 22 mm bis 28 mm