Forged from chrome alloy steel. The jaws are fully hardened and tempered. The polished head is nickel plated chrome plated to protect against rust. The 23° head angle provides better accessibility to the nut.Size: 200 mm (8in). Jaw capacity: 24 mm.
Homebrew Kegging con bloqueo de bola Accesorio de cerveza Cargador de CO2 regulado Cerveza casera Herramienta de bebida de cerveza Válvula reductora de presión
The DEWALT DCK206M2 Twin Pack, contains the following: 1 x 18 Volt DCH253 3 Mode SDS Hammer Drill that is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. The hammer drill has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. It uses 4.0Ah 18 Volt Lithium Ion batteries to deliver high performance, long life and maximum runtime. No Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 Joules.Capacity: Concrete: 24mm, Steel: 13mm, Wood: 26mm.Weight 3.1kg. 1 x 18 Volt DCD785 XR Compact Hammer Drill Driver has an ultra compact, lightweight design that allows it to be used in confined spaces, whilst the intelligent trigger design allows for total control of application. It has a two speed, all metal transmission for increased run time and a longer tool life. Chuck: 13mm Keyless.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/bpmTorque: 60Nm, 14 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 38mm 1 x 10.8-18 Volt DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LEDindicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-Ion DEWALT Slide Pack 10.8, 14.4, and 18 Volt batteries.
IRWIN Vise-Grip powerful locking action with jaws long enough to reach into tight spots with small enough tips to grip tiny objects. Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release. Incorporates a wire cutter.Visegrip Irwin 6LNC Long Nose Locking Pliers Length: 150mm (6in).Capacity: 51mm (2in).
Master Lock classic brass padlocks are a tough and reliable security solution. The solid brass body has a modern diamond shaped design and a brushed finish. The extensive range of brass padlock options means there is a Master Lock brass padlock for just about any need. Each padlock has a solid body, hardened steel shackle and dual locking levers. A variety of multi-pack options, where all padlocks in the pack open with the same key (keyed alike) is also available. Padlocks are available with 4-pin, 5-pin or 6-pin cylinders and with a variety of shackle lengths for added security and for a wider range of possible application options. All Master Lock padlocks are supplied with a minimum of 2 keys and a Lifetime Warranty against mechanical failure. Suggested Uses: Gates, containers, storage units and sheds.The Master Lock 150EURT has the following specifications: 2 x 50 mm solid brass padlocks - 25mm hardneed steel shackle, 7mm diameter - 5-pins - keyed alike
These Facom 12-point OGV sockets have a 1/2 inch drive to fit 1/2 inch ratchets. They are high quality and ideal for tightening and loosening bolts, nuts and other fasteners.The sockets are available in a range of metric sizes.Performance: conform to ISO 2725-1, DIN 3124 and NF ISO 2725-1.The FCMS15 socket has the following specifications:Socket size: 15.0mm.Length: 36mm.Weight: 60g.
