SingleHandleKitchenFaucet,Antique Copper One Hole Pull out/Pull down Widespread Brass Faucet Body with Pop-upDrain andCold Hot Mixer Hoses Lightinthebox

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 4.0mm (5/32 in)

Juego de probador de purga de freno de mano Bomba de vacío Moto de coche Kits de bomba de vacío automática Adaptador de tornillo de purga de freno

Thompson's 10 Year Roof Seal is a high performance coating which cures to form a durable, flexible membrane suitable for resealing and protecting whole roofs or repairing large areas of damage to a variety of roofing materials. The 10 year formulation is designed to flex with the natural movement of the roof protecting the membrane from cracking and splitting over time. UV light stable iron oxide pigments provide a protective shield against harmful UV radiation ensuring 10 year weatherproofing performance under extreme conditions. For best results the advanced formula should be applied directly to dry surfaces, the 10 year formulation forms a vapour permeable membrane that repairs and weatherproofs whilst allowing any trapped moisture in the substrate to escape. This product is supplied in a tin with re-sealable lid and the following specifications:Colour: Black.Available Sizes: 1L, 2.5L or 4L.The Thompsons RSLHPRS1L Roof Seal Black comes in the following:Size: 1 Litre.

The Trend VJSAG36 is an adjustable angle guide to allow grooving with the router, or crosscutting with a circular saw. It has an adjustable angle range from 25º to 155º and preset angle for 30º, 45º, 60º, 90º, 120º, 135º and 150º. The router working length at 90º is 915mm (36 inch), the circular saw working length at 90º is 780mm (30 3/4 inch). It has an angle tolerance ± 0.2º with zeroing facility, adjustable position alloy extrusion with scale and requires three clamps. Will accept accessory friction clamps Ref. VJS/CK or VJS/CK/L.

These Knipex 35 32 Series precision electronics round nose pliers with ESD grip to discharge the electrostatic energy correspondingly slowly and under control to protect endangered components. For very fine installation work in electronics and fine mechanics used for gripping, folding and bending. Smooth ground gripping surfaces with carefully deburred edges. Low friction double spring for gentle smooth closing and opening. Mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. Length: 115mm.Pointed Round Jaws for bending wire eyes.

Gas Fuel Cell Pack for use with the HiKOKI NR90GC Framing Nailer. 1 x Single Pack.