SP Connect Moto Bundle Samsung S9, Smartphone holder

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

An exact replica of the Flight jacket, the Tucker features all the details found on the famous jacket worn by American pilots during World War II. Chic and understated while satisfying all the technical constraints imposed for everyday use on a motorcycle. Outer garment
Non-grainy & thick Wasko leather
Isolation
Removable thermal lining
Protection
Personal Protection Equipment approved shoulder protectors Adjustable approved elbow protectors Pocket for approved back protector
Comfort
Fixed mesh lining Collar and wrist lined with a synthetic fur Ribbed cuffs and ribbed waist Wrist tightening by means of internal adjustment 2 outer pockets Reflective material

Features
Classic collar Adjustable cuffs with gusset and strap Adjustement Buckle on waist Press-stud on biceps Bottom with gusset and strap 4 external pockets, 4 internal pockets, 1 waterproof wallet pocket Connection with trousers thanks to small zip on back + loop
Safety
Certified Elbow-shoulder protectors. Level 2 Back protector pocket Reflective material on back
Material
Noxiguard 600D Drymesh 3/2

The Caliber Leather Jacket is made from durable premium leather which incorporates strategically positioned stretch zones for fit and ventilation intakes for internal air cooling. With class-leading protection and the ability to upgrade to Alpinestars Nucleon chest and back protective system, the certified Caliber Jacket is ideal for road riding. Features
Durable premium leather main chassis constructed from 1.0 – 1.2 mm high grade leather. Strategically positioned stretch panels on sleeves and chest for improved fit and feel. Accordion leather stretch inserts on waist, elbow and rear shoulder for an enhanced range of movement. Two zippered hand pockets plus inner waterproof wallet pocket. Zippered air intake vents are strategically positioned for optimized airflow when opened. Localized perforations offer excellent ventilation and internal airflow. Low profile collar construction with microfiber comfort edging plus 3D textured fabric inner collar lining for comfort. Pre-curved sleeve construction reduces fatigue and improves overall fit. Hook and loop grip cuff adjuster helps keep jacket in position. Reflective details make the rider more visible to other road users. Mesh full lining for breathability and comfort. Removable thermal liner means jacket can be worn in a variety of climates. Inner waterproof wallet / document pocket. Waist connection zipper allows jacket to attach to Alpinestars riding pants. Embossed logos and direct print graphic details for unique look. CLASS-LEADING PROTECTION Chest pad and back compartments (Alpinestars Nucleon chest and back inserts available as accessory upgrade). Multiple snap button system to integrate the Level 2 certified Alpinestars Nucleon back protector. Level 1 certified GP-R shoulder and elbow protectors. External Dynamic Friction Shield (DFS) shoulder slider for impact and abrasion resistance.

Feature:2PC Red Loud Compact Electric Blast Super Tone Hella Horn for CAR/TRUCK 12V D4G1.This is for a set of two (2)horns for 12V systems.These horns use a standard blade connector on the back.Rated at 118dB, these horns are nearly 7X LOUDER than a stock horn (@ 96dB)Each horn has a diameter of 123mm (4.8).Ideal for all types of vehicles.Feature of disc-style horn.High volume.Specification:Material: MetalVoltage: 12VCurrent: 4APower Consumption: 2 x 66WLoudness: 105~118dBFrequency(High Tone): 40020HZ(High)Frequency (Low Tone): 33520HZ(Low)Fitment: Universal for motorcycles, cars, trucks, etcDiameter: 123mm (4.8)Color: Black, blue, green, silver, redPackage Included:2 X Horn1 X Relay

Features
upperhand and ankle protection inner hand reinforcement short cuff elastic band velcro closure