Plasti-Kote Fast Dry Enamel Paint is a superior quality brush-on paint that comes in a handy 59ml bottle and is ideal for small project or craft uses. Fast Dry Enamel is a non-fading, long-lasting paint which is safe to use on children’s toys and furniture. Suitable for use on cardboard, ceramic, glass, metal, paper, plastic, wicker and wood.Colour: Night Blue.
The Knipex 74 91 Series high leverage centre cutters with dipped PVC handles and centric precision cutting edges with an integrated forged joint axle for heavy-duty use. High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle, transmission ratio and ergonomic handle shape. Like most of the Knipex range, these cutters are oil hardened and tempered for longer life, with cutting edges separately induction-hardened to approx. 64hrc. They are made from top quality high grade Chrome Vanadium tool steel with polished hardened heads. Specification Cutting Capacity: Piano: 3.5mm, Hard: 3.8mm, Medium: 5.0mm.Length: 250mm (10in).
The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.
Bahco 80 Series Chrome Plated Finish Adjustable Wrenches with tapered jaws with a measurement scale on the fixed jaw. They have a 16º head angle with no protruding shank when fully open and a strong I section handle with a spring loaded square section, and a knurled adjusting nut.Overall length: 300mm (12 in).Jaw Capacity: 34mmWeight: 645g.Spare Adjustable Jaw BAH8073C-2 - Available to orderSpare Knurl Set: BAH8073C-95 - Available to order
Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact. Designed to drive nail heads below the surface of the wood.Point Diameter: 4.0mm (5/32in)Length: 100mm (4in)
