A professional bi-hexagon, AF socket produced in accordance with ISO 9000 and AS5954 specifications for increased torque and reduced risk of rounding fasteners.Manufactured from chrome vanadium steel with a satin finish.1/2 in square drive.Size 1 3/16 AFLength 43mm
The Makita HM1317C Demolition Hammer offers high durability and excellent demolition performance. Suppression of motor speed during no-load reduces vibration of the tool body. The unique Makita AVT Anti-Vibration Technology design employing the pneumatic pressure created in the drills hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration. Supplied with: 1 x Bull Point, 1 x Side Handle and 1 x Carrying Case. Specification: Input Power: 1,510W No Load Speed: 730-1,450/min Impact Energry: 21 Joules Shank Size: 30mm Hex Weight: 17kg Vibration Chiselling: 8.5 m/sec² Vibration K Factor: 1.5 m/sec² Noise Sound Power: 101 dB(A) Noise Sound Pressure: 81 dB(A) Noise K Factor: 2.4 dB(A)
The ABUS 65 Series brass padlocks have a body which is made from solid brass, hardened steel shackle up to 30mm and hardened steel alloy shackle 40mm and above. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required. The padlock locking is automatic, it does not require a key.The cylinder can be re-keyed to match an existing key (Keyed Alike). Overall width: 30 mmOverall height: 50 mmOverall depth: 14 mm Shackle width: 16 mm I.D.Shackle height: 17.5 mmShackle Dia: 5 mm
The Trend VJSAG36 is an adjustable angle guide to allow grooving with the router, or crosscutting with a circular saw. It has an adjustable angle range from 25º to 155º and preset angle for 30º, 45º, 60º, 90º, 120º, 135º and 150º. The router working length at 90º is 915mm (36 inch), the circular saw working length at 90º is 780mm (30 3/4 inch). It has an angle tolerance ± 0.2º with zeroing facility, adjustable position alloy extrusion with scale and requires three clamps. Will accept accessory friction clamps Ref. VJS/CK or VJS/CK/L.
Nail punches are designed to drive nail heads below the surface of the wood. Square head provides a large striking area which also stops the punch from rolling off the bench. Knurled body with hardened, slightly cupped head.Size. 1/16 in.Length 4 in
