Troy Lee Designs GP Jugend Motocross Handschuhe Schwarz M

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Thanks to breakthroughs in the study of aerodynamic phenomena, SKWAL boasts a design and silhouette resulting from computational fluid simulations, in the aim of optimizing both stability and soundproofing at high speed. The one-of-a-kind SKWAL lines are reinforced and transformed by 3 embedded LEDs powered by a rechargeable battery (USB charging cable included). SKWAL is one of the world s first major integrated manufacturers to be equipped with this technology. Features
1,470 g Constructed from injected thermoplastic resin Pinlock MaxVision visor a standard feature Visor can be fitted with a Pinlock Max Vision® film insert Quick release visor system "Autoseal" system: flattens the visor onto the helmet, offers better soundproofing and seals the helmet (against water and cold) Integrated UV380 label & anti-scratch sun visor Optimal comfort for the persons wearing glasses Micro lock buckle system Planned location for SHARKTOOTH® Interior bamboo treatment for triple effectiveness: antibacterial, anti-sweating and hypoallergenic

Features
Outer shells: 3 Airfit Concept Pinlock® Maxvision Speedview™ Kwikwick3® liner TCT® Thermodynamic Composite Technology New Ellip-Tec® Faceshield System 2 dimensional faceshield equipped with Tear-off pins and Maxvision ready Emergency cheekpads release in order to make easier the removing of the helmet in case of crash Shield lock system: a 3 position lever allows to lock the shield in closed or slightly opened position. Ventilation system: Adjustable, indexed front and rear vents with aero-tuned rear spoiler reduce lift, create vacuum and maximize airflow through helmet. Breath-deflector: Enhanced fog-free performance. Chin-cover: contributes to noise reduction. Closing chinstrap by titanium double D ring.
Airfit Concept Airfit™ permits a rider to personalize helmet fit through air adjustable cheek pads with additional noise reduction.Only by SCORPION EXO! Pinlock® Maxvision Fitting perfectly into the specially depressed area of the faceshield, the Pinlock® creates continuous air pressure through the compression force, which in turn stops condensation – and thus fogging – from occurring even when the temperature difference between the outside and the inside of the helmet increases. Speedview™ An internal retractable sun visor that eases eye strain instantly in varying light conditions without changing face shields. Kwikwick3® liner Very effective, hypoallergenic, removable, machine washable, and very soft and pleasant to the touch, the KwikWick3® lining of the new ScorpionExo® 2015 range is a real custom-made slipper for your head. TCT® Thermodynamic Composite Technology Extremely light, having reduced the weight of the new Exo-1200 Air by nearly 250 g, the new TCT® structure provides a level of protection as yet unseen in the world of helmets. This smart shell is able to gradually crumple on impact, which allows it to absorb most of the energy generated by the shock, while retaining one of the strongest structures. New Ellip-Tec® Faceshield System Launched on the new Scorpion Racing Exo-2000 Air, the ELLIP-TEC® faceshield mechanism further improves the ease and speed of faceshield changes so unique to Scorpion. This operation can be done tool-less within 10 seconds, with the shield open. Wind tunnel designed to minimize wind noise at high speed, fitted with even more powerful springs to ensure optimum fit of the shield against the seal through the compression force, fully sealed and quieter, ELLIP TEC is also stronger to keep the shield in place in the event of a fall.

The revolutionized Tech 7 MX boot incorporates innovative materials and technology in a completely new design for a lighter, more anatomically profiled performer. This CE certified boot promotes core stability and flex via a biomechanical pivot while offering excellent ankle protection. The boot chassis has been designed to give complete feel and optimized interaction with bike controls, while the innovative buckle system allows easy, precise closure. Features
Boot chassis designed with an ergonomically profiled forefoot and lower toebox to provide easier shifting and improved rear brake feel and control. Incorporating an innovative one-piece injected dual compound foot shell with coinjected hard toe protector and integrated steel shank. The shell is highly resistant to abrasion and impact, adds to the boot’s overall durability and improves boot’s streamlining. New dual compound sole is seamlessly integrated into the base structure for superior durability, high performing rubber grip patterning, and feel. The sole and footpeg insert are replaceable. Upper constructed from innovative microfiber material that is flexible and abrasion resistant. Upper material is reinforced with PU for high levels of water-resistance and durability and improved weight-saving performance. Material ensures consistent fit even for long term usage and is easy to maintain and clean. Contoured calf protector plate is injected with high modulus polymer for impact resistance and incorporates Alpinestars’ developed blade flex systemfor greater precision control and movement, added protection for heel and Achilles tendon and helps prevent hyperflexion. New TPU ankle protection system incorporating a biomechanical link between the middle and bottom sections of the boot helping prevent damage to the leg by providing progressive force relief for torsional forces. Alpinestars developed TPU shin plate and medial protection are constructed from one single part for greater structural integrity and stability. The anatomically profiled shin plate features a dual closure system with an internal microfiber flap attached with Velcro® for a precise fit closure while the rugged and durable shin plate attached securely with a precision adjustable buckle. The TPU medial side panel incorporates an advanced honeycomb rubber insert and is designed for excellent grip against the bike while guarding against impact. Wide entry aperture for convenience and allows broad ranging calf fit adjustment and support. Innovative buckle closure system includes high-impact aluminium bridge closures, with memory settings and a quick release/locking system with self-aligning design for easy, precise closure and improved riding performance. All buckles are replaceable. Redesigned instep and Achilles accordion flex zones construction for superior comfort, control and support. Extended microfiber gaiter helps prevent excessive water and dirt entry. Internal lining includes anti-slide microfiber suede on the heel to help keep foot in position. Soft foam reinforcement on ankles and collar for long lasting comfort and shock absorption. New, dual compound, removable anatomic footbed includes EVA and Lycra top for comfort and support ensures even weight distribution and reinforced heel.

Description:New high quality replacements Gas Fuel CapOil Cap Fits STIHL 021 023 025 026 034 036 038 chainsaw.Specification:Color: BlackorangeMaterial: PlasticManufacturer Part Number: 0000 350 0520(Gas Fuel Cap), 0000 350 0510(Oil Cap)Compatible With: Fit for Stihl 020 021 023 024 025 026 028 034 036 038 048 chainsawPackage Included:1 X Gas Fuel Cap1 X Oil Cap

Deep inside a desert burial mound you find him, the all-powerful god of mountain and earth. It is in front of him that you will answer the riddle of steel and the calculus of cool. For he is Krom, and you will not be cast out of Valhalla. Not you, not today. Features
Meets DOT FMVSS 218 (US), ECE 22-05 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country. Includes internal DropShield™ and Clear quick-change fog-free FliteShield™. Removable HydraDry™ moisture wicking liner. Injection molded Polycarbonate shell for strength.
Fit The most common helmet fit type, the Intermediate Oval head is slightly shorter front-to-back and a little wider side-to-side. Venting 4 intake vents, including a MX inspired chinbar vent, and 2 exhaust ports are coupled with deep channeling in the interior energy absorbing EPS foam resulting in superior helmet venting. Weight Average - A reduced shell profile helps reduce overall weight, while maintaining the the exclusive World Standard of ICON to suit your riding style. Exterior The helmet’s ventilation system consists of strategically placed air vents, intakes, air channels and exhaust ports. The oversized chinbar intake enhances airflow, keeping you cool by routing air where you need it most. A decrease of both drag and weight was achieved by sculpting the traditional neckline of the Airflite to avoid jacket or suit interference. Shield The Airflite has not one, but two shields. The unique quick-change fog-free shield keeps debris away from your money maker, while the internal interchangeable drop shield has the sun in check. No more swapping shields for cloudy or sunny days. Just reach up, flip the switch, and ride forever. Interior The removable sweat wicking Hydradry™ liner provides a snug and contoured fit. Air from the vents is channeled between the comfort liner and the protective,energy absorbing EPS foam liner to create a nearly perfect rider-focused interior. The airflow works in conjunction with the Hydradry™ liner to effectively reduce heat build up. Combine that with superior venting and a removable breath deflector which creates a nearly perfect rider-focused enclosure. ICON FliteShield™ Compatible with the Airflite™ helmet. Featuring a 3D molded process for optical clarity, and a fog-free coating. Icon DropShield™ Instead of carrying an extra FliteShield™ for changing light conditions, with the flip of a switch, engage the tinted DropShield™ hidden within the helmet.