AFC Replica Home Trikot 2018/2019

Fully heat-taped jacket in D-Dry® four way stretch elastic fabric. Soft elasticated high-performance fabric ensures comfort and freedom of movement combined with an excellent long-lasting breathable, waterproof seal (20,000 mm water column). Two side pockets.The internal padding in D-Thermo 100 g insulates the body to ensure comfort even at extreme temperatures. Removable braces. The trouser leg bottom features an elasticated bellows adjustment system, anti-abrasion reinforcement, and gaiters.
Material
D-Dry® membrane with four way stretch Abrasion-resistant reinforcement at the calf
Ergonomics
Opening at bottom of pants Belt loops Removable braces Waist adjustment with side straps
Temperature adjustment
Completely heat-taped seams Internal padding in D-Thermo 100 g
Other characteristics
2 side pockets Gaiters

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety SHELL in TRICARBOCO material, mix of Kevlar, carbon and fiber, joint through resine, hand made, using new technologies with vinilester resin. The INTERNAL POLYSTYRENE produced in 3 sizes to get the best fitting. This characteristic allows a gradual and progressive absorption of the energy produced by the impact. Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is determinant for the absorption of the residual energy. A diversified density of the polystyrene, permit us to optimize the mechanical performance of the shell/polystyrene. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Ventilation The internal polystyrene has been studied to work together wityh the air ventilations, put on the shell. The channels allow the perfect inside air flow and at the same time a quick outside air flow from back ventilation. Comfort The CHEEK PADS and the INTERNAL COMFORT shell can be removed, washed and replaced.
They are made of a precious fabric with specific fibers, that offer:
It moves away the body sweat, Keeps rider fresh, dry and completely comfortable, Lightweight, soft and breathable fabric, Performance controlled and certified by ADVANSA.
The cheek pads are easily removable also in case of accident through a red strap which removes the cheek pad even if the helmet is worn by the rider.

The perfect complement to your indoor training work out. The dualist tyres has been specifically designed to reduce tyre contact noise and allows for a smooth indoor ride. Unique to the design is the Dualists ability to be used outdoors tooFEATURESCan be used for indoor training and on-road ridingProvides quiet indoor training due to fully rubber covered side wall27tpi casing design reduces noise and temperature for expanding tire lifeAlmost double thick (1.8mm) tread lasts longerProudly made by Panaracer in Japan factor

Features
100% Cow hide Leather Thermal padded removable lining Snap Claws Adjustable at the waist and wrist 4 pockets, 2 inside and 2 outside 2 Ventilation chest pockets approved protectors for elbow and shoulder Universal backprotector pocket

Features
Shoulder + elbow protectors Trilobite® Techfoam Pro performance material Meets EN1621-2:2014 and EN1621-1:2012 standards Level 2 Extreme shock absorption Multi-layer construction Elastic and flexible Ergonomically shaped Breathable perforation Lightweight

Buyers can receive a partial refund, and keep the item(s) if they are not as described or with quality issues by negotiating directly with seller within 30 days from the day the item(s) were received.