GIRO Switchblade Camera Helmet Visor Black S

Die TapeDesign Allround-Socks Long bestechen durch höchsten Tragekomfort und optimalen Halt in Deinem Schuh. Im Bereich des Fußballs ist diese Technologie für viele Sportler bereits unabkömmlich. Wie bereits durch das Ursprungsprodukt ´Classic´ bekannt, handelt es sich hierbei um einen langen individuell einsetzbaren Socken, der durch speziell platzierte Gummi-Noppen an der Außenseite für mehr Gefühl sowie einen stabilen Halt im Schuh sorgt. Auch die Kompression dieses Produkts fand in aller Kürze einen wahnsinnigen Anklang. Durch den vom Nutzer ausgeübten Druck auf die Sockensohle wird das Körpergewicht durch die spezielle Anordnung der extrem weichen und zudem dämpfenden Noppen gleichmäßig verteilt und sorgt somit für ein unglaubliches Wohlgefühl. Dies sind unabdingbare Argumente für eine perfekte Performance des Sportlers. Die Anti-Slip-Socks von TapeDesign sind aus außergewöhnlich elastischem Material gefertigt und passen sich daher für einen einzigartigen Tragekomfort ergonomisch perfekt an Deinen Fuß an. Verschiedene Größen sind mit diesem aus modernsten Textilfasern konzipierten High-Tech-Produkt nicht mehr notwendig. Die speziellen Gumminoppen an der Außenseite ermöglichen zudem eine herausragende Stabilität - sie garantieren außerdem einen ultimativen Grip bei einer sensationellen Strapazierfähigkeit und sorgen für den maximalen Halt in JEDEM Schuh!TapeDesign ist ein junges, innovatives und hochmotiviertes Start-Up-Unternehmen aus Österreich, das sich mit einem revolutionären, hochqualitativen und extrem funktionellen Produkt sowie einem coolen Markenauftritt binnen kürzester Zeit seinen festen Platz auf dem Sportartikelsektor gesichert hat. Eigenschaften:Long Socke: Die Socken sind länger geschnitten und verlaufen komplett über die Wade bis unterhalb zum KnieONE-Size (Gr. 37 - 48) durch besondere Verarbeitung des sehr hochwertigen MaterialsSpeziell platzierte Gummi-Noppen an der Außenseite in ergonomischer Fußform für den perfekten Halt im SchuhBester Tragekomfort durch hochwertige VerarbeitungTapeDesign-Socks überzeugen nicht nur durch Qualität, Funktionalität und Komfort, auch Ihr Design wurde zu einem echten Hingucker auf den Fußballplätzen dieser WeltVielseitig von Profi- und Hobbysportlern in allen möglichen Sportarten (z.B. Running, Fußball, Basketball, Tennis, etc.) getestet und als hervorragend empfundenBei allen Sportarten einsetzbar, in denen Richtungswechsel und Rotationsbewegungen erforderlich sindDer One Size Socken der Zukunft, keine Größen mehr: Der TapeDesign Socken passt sich ergonomisch an Deinen Fuß an - egal ob Größe 37 oder 48. Durch den von Dir ausgeübten Druck auf den Socken, wird das Körpergewicht gleichmäßig auf die Rutschflächen verteilt und sorgt somit für ein unglaubliches Wohlgefühl bei einer perfekten Performance Die funktionellen TapeDesign Anti-Slip Socks bestehen aus einem elastischen Material, damit sich die Socken perfekt an Deinen Fuß anpassen und für einen hervorragenden Tragekomfort sorgenDie speziellen Gummi-Noppen an der Unterseite ermöglichen eine ideale Stabilität und besten Halt während einer schweißtreibenden Trainingseinheit. Die Socken garantieren außerdem einen ultimativen Grip mit erstklassiger Strapazierfähigkeit und sorgen für den maximalen Halt in Deinem Schuh. Hol Dir jetzt Deine TapeDesign Socken und erlebe eine spürbare Veränderung Deiner Trainingseinheiten! Nicht nur durch Komfort und Qualität beeindrucken die TapeDesign Socks, sondern auch das Design sticht herausIm coolen TapeDesign-Look erstrahlen die Anti-Slip Socks und versprechen mit den einzelnen Details einen echten Hingucker, wo immer Du auch bistFür jede Sportart den perfekten Socken: Die TapeDesign Socken bieten den optimalen Grip - egal ob Fußball, Laufen, oder mehrDer TapeDesign Socken passt sich ergonomisch an Deinen Fuß an: Durch den von Dir ausgeübten Druck auf den Socken, wird das Körpergewicht gleichmäßig auf die Rutschflächen verteilt und sorgt somit für ein unglaubliches Wohlgefühl bei einer perfekten Performance. TapeDesign Socken bestehen aus einem sehr hochwertigen Material und passen sich Deinem Fuß optimal an, egal ob Größe 37 oder 48

The Original Jeans from Richa come really recommended by us at The Cafe Racer if you re after a comfortable no-nonsense pair of motorcycle jeans at a decent price. They have mechanical stretch properties which makes them really comfortable from the get-go and they are made from a mix of denim Cordura, cotton and polyester without the bulk you get with a lot of protective jeans. There are CE certified D3O armour in the hips and knees and safety stitching all over the jeans, not just in key areas. The postion of the D3O knee protectors can be adjusted vertically to suit and there is a soft polycotton lining. Ticks all the boxes for safety and protection, they look great, are super comfortable and a nice price. Features
Mix of Denim Cordura®, cotton & polyester Polycotton soft lining D3O knee & hip protector,EN1621-1:2011 (Level 1) Fully CE certified (individual protective gear) Safety stitching all over the trouser Mechanical stretch for optimal comfort The position of the knee protectors is vertically adjustable Straight fit

T2500.95: Tacx Frame for Booster Trainers

Fits for
Rocc 490 Rocc 491 Rocc 320 Rocc 321
Features
scratch resistant

example picture

Chaser-X is the third Arai helmet that makes use of the new VAS (variable Axis System) technology that offers a significant larger and smoother shell area above the SNELL test line greatly improving the important helmet glancing off performance. The Chaser-X makes use of an also completely new ventilation system derived from the RX-7V, instantly recognizable by the large, single intake duct on top of the helmet. This Top Ventilation System is derived from the RX-7V diffuser system. The replaceable interior is lined with an anti-microbial fabric. The Chaser-X features FCS (Facial Contour System) and a fixed, non-retractable mini chin cover. The chin vent is also new, while the Formula One developed visor lock system is the same as used on the RX-7V. All Chaser-X helmets come with a standard Max Vision visor with a Pinlock inlay lens separately packed in the box. Chaser-X Ventilation: New system The Chaser-X features an exclusive ventilation system that is unique to this model. It is instantly recognizable by the large intake and exhaust duct on the front part of the helmet. The large inlet allows generous amounts of cool, fresh air to enter the helmet, assisted by the two inlets in the large single frame rear duct. The exhaust function of the large front duct keeps working when the intake is closed. The two small exhaust vents on the back of the helmet help to quickly dispose hot, warm air from the helmets interior. Shell Construction SFL Special Fibre Laminate Strict quality controlled construction using special fibre layers, crowded with fibres right to the shell surfaces and bonded with special resins formulated by Arai, to disperse impact energy over the widest possible area – the shell’s main job – through strength, structural integrity and impact flexibility. Variable Axis System (VAS) With VAS, the visor mounting position is lowered, yielding an average of an additional 24mm across both temple areas, in pursuit of the ideal smoother shape that increases the ability of glancing off energy. As a result, this has made it possible for more of the shell to be smoother along and above the test line of the Snell standard. Ventilation: Free Flow System (FFS) Creates airflow under the helmet that reduces wind noise and turbulence while increasing the exhaust of hot air. Front Ventilation: Center top vent The new Top Vent provides 11% more airflow than the previous Vent. The new bigger switch makes opening and closing easier. The new Top Vent has three positions, closed, half open and fully open to adjust the airflow and prevent water intrusion when fully closed. Front Ventilation: Standard brow vents Fresh air can enter directly to the forehead area without the need for holes in this critical area of the shell and impact absorbing liner. For specific models the ventilation is extended to the temple area. Front Ventilation: Three position chin vent Three-position chin vent helps in demisting the visor and offering fresh, cool air to the rider. Rear Ventilation: Neck exhaust vent To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet. Rear Ventilation: One-piece rear exhaust Extracts more hot air from the helmets interior and improves aerodynamics. Rear Ventilation: Side exhausts Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance. Aerodynamics: Fixed Chin Spoiler Helps minimize wind noise and also aids with the extraction of hot air from the face area. Provides additional deflection of road debris away from neck. Depending on the model the Chin Spoiler is retractable Visor: VAS Max Vision Visor with De-Mist option VAS MAX Vision shield is standard to provide better visibility in all seasons and for all types of riding. Comes standard with Clear anti-fog Pinlock insert to be installed as needed. Visor: New shield latch system Borrowed from our F1 helmet, completely modified 3D moving new shield latch mechanism secures the shield like never before, but operates smoothly with an intuitive fluid – one finger operation – even with gloves. Visor: Pinlock insert lens included Effectively prevents misting and fogging of the visor, even under extreme wet and damp conditions. May be cleaned and changed easily. Interior: Antimicrobial Liner New exclusive liner with antimicrobial stays fresher between cleanings. Interior: Replaceable Cheek pads/Ear cups Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Replaceable Interior Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Speaker pockets Build in communication systems are popular, but the problem is often that the room for a speaker is limited or just not present, causing unpleasant pressure points. The speaker pockets, offering room for mounting speakers without effecting comfort or fit. (Speaker not included). Interior: Facial Contour System (FCS) To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure. Interior: 5mm ’’Peel Away’’ Ear cups/Cheek pads Giving even more ability to craft the perfect fit and comfort, the cheek pads now feature a 5 mm peel away layer for added room if needed. Interior: Thin centre pad for more room in front area The result is more room around the nose and mouth area enhancing the famous Arai fit and comfort even more. Approval: ECE 22-05 The most common helmet certification internationally, required by over 50 countries worldwide. Five times inspected Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections. Washable interior The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water. Handmade It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours. All-day comfort All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai. Penetration tested All Arai helmets are penetration tested, although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet. Double-D ring device The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener. Smooth shape, better protection The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact. Hard outer shell, soft inner shell Arai uses a very hard outer shell to spread impact forces and a soft inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component. Organic shape The organic shape of an Arai outer shell offers a more natural appearance, seals better and conforms more to the head’s natural shape for improved comfort, fit and to help minimize wind turbulence. 5-year limited warranty All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture. Different outer shells Unlike many other manufacturers Arai provides one size outer shell for each two-helmet sizes for most models. Together with different shaped outer shells for different models it is almost impossible not to find the fit you are looking for. Arai In-house test This Arai helmet is designed to meet the stringent Arai In-house standard requirements, in addition to mandatory standards such as ECE 22-05 and voluntary standards such as SNELL M2010.

The ICON Hypersport pant is the elite accompaniment to the Hypersport jacket. Like the entire ICON Hypersport series, the Hypersport pant is constructed of multiple materials, each chosen for their unique performance properties. The main chassis is comprised of 1.2-1.4mm TrackSpec™ leather, stretch Cordura, and nylon lowers. This construction yields an incredibly durable pant while keeping overall weight to a minimum. TPU knee plates and adjustable D3O® knee impact protectors are coupled with integrated knee and lumbar flex zones for excellent on-bike mobility. Strategic areas of laser-perforated venting and TechMesh™ paneling help keep everything cool. The tailored fit (no diaper butt here) is accompanied by a ratchet fly closure and dual waist adjustment straps. The Hypersport pant includes an internal waist zipper that connects to either the Hypersport Prime jacket or the Hypersport jacket.
Features
FIT: Icon Attack Fit MATERIAL: 1.2-1.4mm TrackSpec™ Leather Chassis PROTECTORS: D3O® Impact Protectors - knees DETAILS: TPU Injected knee plates, Integrated flex zones, TechMesh™ panels, Waist zipper connects to Hypersport™ series pants, Overboot fitment, Waist adjusters