Catégorie:Voiles longueur coude; Décoration:Appliques; Couche de voile:Deux couches; Silhouette de voile:Ovale; Tissu:Tulle,Dentelle; Longueur Actuelle de la Voile:27,56 dans (70cm); Style:Elégant,Bord en dentelle; Largeur:75; Longueur approximative:75; date d'inscription:06/06/2019; Mode de production:Auto-produit; Produits spéciaux sélectionnés:COD
The Forge range of Gable Handles incorporates a traditional backplate style with a scroll handle. The sprung handles have a lasting finish. They are ideal for internal or external use as the handles have been tested for corrosion resistance and cycle tested beyond 100,000 uses. Supplied with screws and fitting instructions. Product Dimensions:Backplate: 170 x 42mm.Handle: 55 x 93mm. Fitting Instructions:1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a bradawl.2. Drill Ø2mm pilot holes and reposition the handle before securing using the wood screws provided.3. If fitting Bathroom handles, now insert the bathroom spindle bar through the deadbolt hole of the lock from the outside of the door and place the thumbturn onto the spindle bar. Tighten the grubscrew on the underside with the hex key provided.Designed to be used with any tubular mortice latch. Finish: Brass.
The Pro Metal Quick Connect hose connectors from Hozelock have zinc die-cast sleeve, ensuring that they are strong, durable and scratch resistant. The large bump ring protects greenhouses and cars from damage. The Aqua Stop connector incorporates an internal valve that stops the water flow when an accessory (e.g a spray gun) is disconnected. This saves having to go back to the tap to turn the water off when switching between accessories. It also helps save water in the garden because it stops the water flow so less water is wasted. All internal parts are made from ultra tough engineering plastics for a long leak free life. The connection to the tap is guaranteed secure up to 10 bar, thanks to a triple locking system and the sleeve is easy to use even when wet because of the twin soft touch pads. The hose is firmly connected by barbs that connect with the inside and outside of the hose. Hose kinking, swelling, and leaking at the connection point with the fitting are virtually eliminated due to the ingenious, flexible hose-tail on the nut.This hose connector is best used at the gun end of a hosepipe. Suitable for use with all 12.5mm (1/2 inch) and 15mm (5/8 inch) hose.
