Plasterboard Spring Toggle - Zinc Plated M3 x 50mm (Pack 8)

Fisco professional and high quality Chalk Line with hard wearing grey polystyrene frame and a tough braided line which can be locked at any length. The long, grey handle ensures a secure grip and the 1.5mm braided yellow line is coloured throughout its thickness for superior resistance to UV lights.A rotating rewind knob on the handle provides fast rewinding, and the detachable hand grip allows insertion into a ranging pole.Length: 100m.

This hacking knife has a steel blade with twin leather scales riveted to the shaft. It can be struck with a hammer to remove old putty from window frames. Size: 4.1/2in.

Hammerite "Direct to Rust" Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3-in-1 formula, there is no need to use a primer or undercoat...saving you precious time! It forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion-resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. The paint has a subtle hammered effect with a metallic sheen, and protects up to 8 years. Two coats are required. Specification: Colour : Black Finish : Hammered Size : 2.5L Coverage : 5m²/L

The Knipex 7 Way Cabinet Control Key is suitable for control cabinets and shut-off systems in the supply of gas, water and electricity, e.g. air conditioning, ventilation systems, shut-off valves, mains switch-boards, etc. Supplied with a securing chain. It has the following functions: 3 x Square: 5, 6 & 8mm.1 x Triangular: 9mm. 1 x Two-Way: 3-5mm.1 x Double Ended Bit (Slotted 1.0x7mm and PH2).1 x 1/4in Bit Adaptor.

Monument Tap Reseating Tool 1/2 inch re-cuts the seats of worn taps or stopcocks without disconnection from the pipework.Tapered cones screw into the top of the tap body, provided the tap body is threaded to the top. For taps with recessed threads in the body, use the parallel bush series. Cutters are case hardened. The feedscrew allows fine adjustment to the cutter. All parts are interchangeable. Fits old series 1/2 in BS1010 flat seats. Complete with 17 and 19mm (11/16 in and 3/4 in ) flat cutters and a tapered cone.

The Bahco Screwdriver for Pozidriv head screws. The double shape handle allows for optimum grip and maximum torque power. Permanent colour codes at both ends of the handle, for a quick identification of the tip. The blade tip is made from high performance alloy steel. Chrome plated and entirely hardened. Black finish tip for higher accuracy. The size and part number are laser branded on the blade for easier identification The Hexagon profile blade and bolster allow the use of a wrench for jobs that require more torque. The blade continues through the handle with no loss of hammer blow energy. Metallic cap gives protection during jobs requiring high impact. Conforms to ISO 8764. Colour coded for quick identification of tip type: Yellow: Slotted.Red: Phillips.Blue: Pozidriv.Green: Torx.Purple: Hexagon (Nutdriver).Bahco Tekno+ Through Shank Screwdriver. Pozi Tip PZ2 x 125mm.