Gratis
Apoyo
The Faithfull Centre Square (Finder) is made from ground tool steel and has a hardened and tempered blade. The device has a useful square for rapid location of round bar or disc centre. To execute, place the round bar between the centre square. Scribe different lines on the workpiece each time changing its position. The centre of the scribed lines will provide the accurate centre of the workpiece. The Centre Square (Finder) is supplied in a box.Bar Capacity: 75mm.
Forge London Shelf Brackets for light to medium-duty shelving applications.The FGELONGR1214 London Shelf Brackets have the following specifications: Finish: Grey. Size: 350 x 300mm. Pack quantity: 20.
1/4 "SAE Aire acondicionado Refrigerante Abrelatas CA Puede tocar la válvula de la botella Puede tocar la válvula Válvula de la compuerta Válvula de cierre de la válvula de retención
These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 125mm (5 in). Blade length (B): 16mm (0.63 in). Head width (C): 16mm (0.63 in). Head depth (D): 8mm (0.31 in). Tip width: (F): 1.6mm (0.06 in). Cutting capacity: 0.4-2.0mm. Cutting edge: Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.
The Faithfull Brass Ball Chain Kit is ideal for use with basin, sink and bath chains. Supplied with fittings. Chain length: 1 metre.Finish: Polished brass.
These Forgefix Spring Lock Washers ring-shaped, split at one point and bent into a helix. This shape means that the washer exerts a spring force between the fastener's head and the base item. The main purpose of the Spring Washer is to prevent loosening of the fastener by either movement or vibration.These washers are bright zinc plated for increased corrosion resistance. APPLICATIONIdeal for all manner of bolting applications where movement or vibration may cause loosening. Typical examples would be engineering and machinery.Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Spring Washers ZP M10 Bag 100