Spidi Vanity, textile jacket

Features
Hard shells with metal inserts on shoulders, elbows and knees removable and aerodynamically shaped back hump comfort collar with neoprene completion sportiv fitting with ergonomic cut leather stretch over shoulders, elbows, buttocks and knees elastic comfort insets at shoulder, crook of arm, cleat, hollow of knee and calf improving the mobility connection zipper kneeslider patch calf width adjustment by a second zipper 1 innerpocket
Safety
SAS-TEC protectors on the shoulders, elbows, hips and knees Retrofittable SAS-TEC back protector safety seams according to ISO 4916 doubled material on the buttocks reflective elements
Material
robust 1.2 to 1.4 mm thick cow leather combined with elastic polyamide fabric breathable mesh lining with elastic inserts

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Specification:Quantity: 1pcColor: Black / GrayPlacement on vehicle: RearProduct Name: Pet Car Back Seat CoverMaterial: 600D Oxford + PP cotton + 190TSize: 170cm x 180cm / 66.93 x 70.87 (L x W)(Please let us know the Color youd like.You can leave the message on your Paypal note to tell us.)Features:-Pocket design, can put some items.-100% Brand new with good performance.-Protects your car seat from pet dander, hair, spills, oders, mud and water.-The pet seat cover is universal, easy to adjust and install according to different models.-Cover the edges of multi-layer overlapping back edge alignment to make the cushion last longer.-Waterproof 600D Oxford Cloth, grasp resistance, tear resistance, non-sticky hair, safety without hidden dangers.-When the seat cover gets dirty, the trunk cover is washable, you can clean with a damp cloth or vacuum to remove the dirty.Fitment:Suitable for cars, SUVs, etc.Package included:1 X Pet Car Back Seat CoverNote:1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.2.Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)3.There are no instruction included!Professional Installation Is Highly Recommended!!If you want to know how to use or install it,please contact us by Email.We will provide help as much as possible.

4 Pcs Window Visor Vent Sun Shade Rain Guard Deflectors For Toyota RAV4 2019~2020Material: AcrylicType: CLIP-ON TYPEColor: Translucent Black With Chrome TrimFitment:For Toyota RAV4 2019~2020Features:No Drilling needed.Super Light-weight, DurableWeather-proof.Acrylic Material is light weight and durability.Enhances appearance and adds stylish individualism.Allow windows to be down a little when raining,keep fresh air in and rain out.Prevent the car from being scraped and improve the level of the decoration of the car.Attached with adhesive tape on back,install it on door frame by adhesive tape and clips,double assurances make visors more stable and firmer on freeways.Warm Tips:1.Before installation, Please keep the surface clean and dry, no sand/dust.2.Under 15 ℃, you can use a Hair dryer to warm the product and adhesive tapes up before installation.3.Please keep the product out from moisture and dust within 24 hours after installation.Package Included:4 x Window Vent Deflector Rain Guard Visor

The iXS Eliott leather jacket is made of nappa leather
Features
Antiseptic polyester mesh lining Detachable thermal lining 3 outside pockets, 3 interior pockets on the thermal vest and 2 inner pockets in mesh lining Shoulder and elbow protectors WINNER® - meet the test standard EN1621-1 Preparation for a back protector

Motorcycle Spot Light Bar Set With Two Turn Signals For Harley CustomDescription:TofitmostHarleytouringsoranycustomapplications.Thelightbarispre-drilledtoallowforinternalwiringoflightsSteellightbarwithRoundChromeMetalspotlightturnsignalsBlackfinishedwithreflectiveinteriordrivinglightDrivingLights:4clearlens,43/4wide,43/4tallfrombasetotop.21/2longfromlenstopoint.TurnSignalLights:Minibulletstyle,2wide,2-1/2tallfrombasetotop,2-7/8longfromlenstopoint.Colorisamber.Specification:Color:BlackSize:showinthepictureMaterial:HighQualitySteel/ABSPlasticCategory:PassingFogMiniHeadlightsBulbType:IncandescentNote:Thislightbarisnotcustommadeforanybikes.ThereforesomeminormodificationmaybeneededPleasecheckbracketmeasurementtoensureifitwillfityourbikeNoinstructionincluded,ProfessionalinstallationrecommendedNotDOTapproved.ForoffroadorshowuseonlyLawsconcerningthisproductvaryfromstate/provincetostate/provinceYourstate/provincemayprohibititsuseonpublicroadsorrestrictitsusetonovelty,showuse,offroadareas,orracefacilityareasonly.Insomestates/provincesoff-roadusesarealsoprohibited.ThemanufacturerandretailerassumenoresponsibilityforanyuseorapplicationofthisproductinviolationofanyapplicablelawBeforeinstallingthisproduct,pleasecheckyourstate/provincialandlocal/municipallawsandregulationsPackageIncluded:2 X PassingSpotLight2 X TurnSignals1 X Bracket