The Knipex 7 Way Cabinet Control Key is suitable for control cabinets and shut-off systems in the supply of gas, water and electricity, e.g. air conditioning, ventilation systems, shut-off valves, mains switch-boards, etc. Supplied with a securing chain. It has the following functions: 3 x Square: 5, 6 & 8mm.1 x Triangular: 9mm. 1 x Two-Way: 3-5mm.1 x Double Ended Bit (Slotted 1.0x7mm and PH2).1 x 1/4in Bit Adaptor.
Monument D.I.Y. Tap Reseating Tool re-cuts the seat of leaking taps. Fits BS5412 & BS1010 1/2in and 3/4in taps. Complete with: 17, 19 and 25mm (11/16in 3/4in 1in) Flat Cutters and two double ended plastic bushes. Made in Britain.
The Einhell Power-X-Change Combi & Impact Driver Twin Pack, contains the following: 1 x 18 Volt TE-CD 18-2 Li-i Power X-Change Combi Drill is a powerful and versatile tool for screwdriving, drilling and hammer drilling jobs. It has a robust, long-lasting 2-speed metal gear box for high torque and torque slip coupling that prevents over tightening of screws. Chuck: 13mm Keyless. No Load Speed: 0-320/0-1350/min. Max Torque: 48Nm 25 Settings. Capacity: Concrete: 15mm. Weight: 1.76kg. 1 x 18 Volt TE-CI 18 LI Power X-Change Impact Driver is fitted with a unique triathlon motor that is powerful and efficient for the highest demands in power-sapping screwdriving jobs. The special impact mechanism eliminates any torsion force on the user’s wrist. Short, lightweight design with ergonomic soft-grip surfaces and a rugged aluminium housing with additional rubber supports for increased protection. Bit Holder: 6.35mm (1/4in). No Load Speed: 0-2,300/min. Impact Rate: 0-3,200/bpm. Max Torque: 140Nm. 1 x 18 Volt Power-X-Change Charger that features a 6-step charging condition display and is ready for wall-fastening. The charger uses an intelligent charging-management-system for long battery life (battery status will be constantly checked and accordant loaded, a deeply discharged battery will be charged in repair mode). Input Power: 240 Volt. Output Voltage:21 Volt. Charging Time: 1.5Ah: 30 min, 3.0Ah: 60 min, 5.2Ah: 130 min. Weight: 0.5kg. Also comes with 2 x 18 Volt 1.5Ah Power X-Change Li-Ion Batteries and 1 x Toolbag.
The ABUS 65 Series brass padlocks have a body which is made from solid brass, hardened steel shackle up to 30mm and hardened steel alloy shackle 40mm and above. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required. The padlock locking is automatic, it does not require a key.The cylinder can be re-keyed to match an existing key (Keyed Alike). Overall width: 50 mmOverall height: 77 mmOverall depth: 18 mm Shackle width: 28 mm I.D.Shckle height: 29 mmShackle Dia: 8 mm
The Makita 9920 Belt Sander has the following features:- Variable speed control.- Constant speed under load.- High power for stock removal.- Flat top for inverted applications.- Dust bag.- Long cable for sanding runs.- Double insulated. Technical specifications:Belt Size: 76 x 610mm.Belt Speed: 210 - 440m/min.Power rating: 1,010 watt.Vibration sanding: 2.5m/sec².Vibration K factor: 1.5m/sec².Noise sound power: 96 dB(A).Noise sound pressure : 85 dB(A).Noise K factor: 3 dB(A).Net weight: 4.5kg. Supplied with:Abrasive belt.Cork/carbon pad.Dust bag.The Makita MAK9920 Belt Sander Variable Speed uses 240 volt.
The tool has double insulation for increased user protection and a built-in dust collection system to keep wok areas free from debris and dust. Hook and loop type abrasive paper can be used. It is supplied with a front grip, dust bag and an abrasive disc.
A quick and easy way to cut clean square holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.All punches boxed singly without spanner, which should be ordered separately. Size.19.0mm.Square.Spanner Operated 5/8in AF.
