Bell Scout Air Check Jet Helmet, black-silver, Size S, black-silver, Size S

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Features
Classic collar with neoprene high neck roll press stud tightening on biceps cuffs with tension strap Floor lift with buckle elbow Sides and shoulders reinforced with extra resistant fabric Reinforced and foamed lumbar zone 2 outside pockets 3 inside pockets 1 waterproof wallet Connection with the trousers by zipper Buckle on the back
Material
Removable inner lining warm and waterproof breathable Drymesh 5/5 membrane to which the membrane connects.
Safety
Model Elbow Shoulder Protectors Level 2 Bag for back protector Reflective stripes on the reverse side

Oversize version of Spidi VTM pants, with sizes up to 6XL. Tough, resistant waterproof touring/enduro trousers with removable insulating liner, ideal match for a Voyager 2 jacket. Spidi VTM fits perfectly thanks to its several racing-derived stretch inserts and aptly placed adjusts, it is equipped with hip protectors and adjustable knee protectors (Multitech). These trousers feature removable straps and a waistile zipper to become a full-on touring kit for hardcore bike adventurer, but their ease of use adapts well also to more casual riders in need of a barrier against bad weather Material
High visibility reflex areas Highly resistant stretch material for improved fitting High resistance Tenax Tactel polyamide
Ergonomy
Oversize available
Performance
Adjustable knee protectors Removable straps Zipper joint jacket-trousers
Comfort
H2OUT membrane 100g/m2 wadded thermo lining
Protection
Multitech hips/knees

Feature:Invert DC 12V to household AC 220V, power a wide variety of household AC products.Split positive and negative pole access ports, red (positive), black (negative), easy to distinguish.The output port is a universal socket, compatible with most plugs.Independent power switch, directly control the inverter work, independent USB interface, convenient mobile device charging.Intelligent cooling fan, can greatly improve the service life of the inverter.Suitable for family, industry, travel and other activities.Specification:Input Voltage: DC 12VOutput Voltage: AC 220VPower: 900WPeak Output Power: 1600WOutput Frequency: 50Hz +/- 2HzConversion Efficiency: 75%Protection: Overload, short circuit, overtemp, reverse polarity, under/ over voltageMaterial: Aluminum alloyDimension: Approx. 28x11x5.5cm/ 11.02x4.33x2.17Battery Clip Cable Length: Approx. 50cm/ 19.68Package Included:1 X Power Inverter1 X Battery Clip Cable

Spidi MOTORSPORT is a vintage style leather jacket for custom and streetbike use, also very good for short to mid range touring.
Technical features: Arrangement for internal Lady protector Biomechanic protectors 60g/m2 removable insulating liner Clip stop for casual pants attach Adjustable waist fastening Zip to reduce volumes Highly fitting cowhide with 0.6/0.8mm thickness High visibility reflex areas

Specification:Input Voltage: DC 12V/20A, 24V/10AOperating Temperature: -13℉~176℉/ -25 ℃ ~ 80 ℃Rocker Switch: 2IP Rating: IP65Material: ABS+PC+AluminumColor: BlackLED Color: Red, Green, Blue, OrangeSize: 72 x 67 x 90mmFeature:1.Pre-wired for you to easily install in both 12V and 24V vehicle, yacht, ship, caravan, truck, etc.2.Switch panel for controlling universal electrical equipment in the vehicle: headlight, fog light, width light, car refrigerator switch,car vacuum switch, take electric for automobile external equipment, ci-garette lighter and so on.3.IP65 waterproof, with rubber seal-cap to keep it waterproof, best for marine.4.2x LED illuminated marine grade rocker switches, presented with vehicle and marine labels, easy for DIY.7.easy to replace, protect panel from over-heating, over-currents, over charging and short circuit.8.High quality, more durable and solid aluminum panel than the plastic or the wooden one.Connection Instruction:Black Wire=NegativeRed Wire=PositiveNote:1.No Instructions Included.2.Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)Packing Included:1 x Rocker Switch Panel