Gratis
Apoyo
Liberon Bronze Liming Brush is made from long-lasting bronze bristles, which make it ideal for opening the grain of hardwood before liming. It is shaped so that it is comfortable to hold and use, and is suitable for cleaning heavy carvings, mouldings and stone. Performance- Opens the grain of hardwood before applying liming wax. - Perfect for cleaning heavy carvings, mouldings and stone. The LIBBLBRUSH has a weight of 1.36kg.
This Teng Tools Aluminium Clip Rail is ideal for mounting on a wall or for use in a toolbox, to conveniently store Teng sockets. It is suitable for use with clips for 1/4 inch, 3/8 inch and 1/2 inch sockets, which clip onto the single track rail and which hold the socket in place. Clips NOT included.The TENALU430 Section Rail has the following length: 1 metre.
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S
The Faithfull sleek heavy-duty aluminium tacker featuring a unique Triggershot action that can be selected when placing staples in hard to reach places and is ideal for single-handed use when flush stapling or when precise positioning is required. Additional features include force adjustment, an easy drop-in loading system with a reload indicator and a built-in handle lock for easy storage. Accepts: Staples No.4: 6-14mm.Brad Nails No.8: 12-14mm.Pin Nails No.9: 14mm.
This Marshalltown Masons Line is made from twisted nylon that has been heat set after winding to increase stability. Not affected by mortar, oil or mildew and will not absorb water. Suitable for staking out sites, concrete and landscaping layout and brick/block laying. Made in the U.S.A1 x Marshalltown M632 Masons Line 76.2m (250ft) - Fluorescent Yellow
IRWIN Vise-Grip Cable Cutter have an induction hardened chromium nickel steel cutting face that stay sharper for longer. The pliers also feature machined jaws for maximum gripping strength and the moulded ProTouch handles for added comfort and less hand fatigue. Can cut up to 2.0 mm cables and a moulded 1 component handle that is pull-resistant.Length: 200mm (8 in).