Vauxhall Carlton 2.6Li Diecast Model Car

Features: 2x 2812LED outputs option 5x UARTs, 1x pair I2C1 pads 6x PWM / DShot outputs without conflict 1x Side-press button for BOOT(DFU) mode 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator (Red) 1x Group of 5V/G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND 4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible) 1x 16pin bottom mounted FFC Slot for FCHUB-6S, FCHUB-VTX or FCHUB-W connection

New-Ray Toys 1:32 Ducati Marianna Diecast Model Motorcycle 06033B Great budget model of this classic Italian bike.

This Shelby Cobra 427 Diecast Model Car is Red and features working wheels and also opening bonnet with engine, doors. It is made by Solido and is 1:18 scale (approx. 24cm / 9.4in long).

3100KV moteur sans brosse 3650 moteur étanche avec 60A sans brosse ESC 5.8V 3A BEC dissipateur thermique pour 1/8 1/10 RC voiture

Age Range:All Ages; Dimensions (cm):19175.2; Weight (kg):0.4

Features: With electronic compass and barometer. SP Racing F3 Flight Control With Integrated OSD for Multicopter. The SPR F3 builds on tried and tested software, processor and sensor technology to make your aircraft fly like it's on rails. ST debug port on the back of the board have(SWD) and startup mode selection, not deadlock bootloader. There MEGA328 ISP port on the back of the board, will not deadlock bootloader. Looptime up to about 2 times the previous generation based stm32F1 flight control. Use all the features all the time. Connect your OSD + Smartport + SBus + GPS + LED Strip + Battery Monitoring + Sonar + 8 motors - all at the same time. The SP F3 runs Cleanflight which can be configured to suit your needs using a cross-platform GUI(Windows/OSX/Linux). Tiny and lightweight. On-board high-capacity black box flight log recorder - optimize your tuning and see the results of your setup without guesswork. STM32 F3 support next-generation processor attitude efficient hardware floating-point operations, and faster ARM Cortex M4 core computing. All using 2.54 interface. PDB can be more perfect combination. Full support for OneShot ESCs for easy PID tuning and a sharper response. Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in). Dedicated output for programmable LEDs - great for orientation, racing and night flying. Battery monitoring ports for voltage and current. Sonar support for precision low-altitude hold. I2C port always powered, perfect for external sensors or always-on OLED screen. Buzzer port for audible warnings and notification. F3 + OSD run the company to modify the optimization of cleanflight flight control software(FC).