Klim Equinox Ladies Bleu M

* Tested and approved according to European Standard EN 1938:2010 * Supports Total Vision System (Sold separately) * Plush goggle bag included for safe storage | Article: Thor Combat Youth Motocross Goggles, pink | Article: Thor Combat Youth Motocross Goggles, pink, pink

Description:Highly sensitive,use immediately after matching.This project is not a remote control, it is just a remote key chip replacement.The chip will need programming by a group dealer or by the locksmith.Chip can be programmed only ONCE.Specification:-Color: Black-Material: Ceramic-Size: 12x5x3mm-Type: 4D69 ID69 80 Bits-Fit For Yamaha and other Motorcycles.Package Included:1 X Transponder Chip

Entwickelt für Komfort und uneingeschränkte Bewegungsfreiheit in der Fahrposition. Innere Oberschenkelpolster Integrierte Schrittpolsterung

Features
Lining: 100% polyester Polycarbonate on-and off-road helmet with visor Forehead and chin ventilation Clear, scratch-resistant quick release visor Pinlock® prepared Integrated sun visor (inside) to fold down ratchet Removable, high quality inner lining New matt coating technology - NMT

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Casque Astone GT800 Evo Kaiman Les casques Astone couvrent tous les segments du marché pour répondre aux différents besoins des consommateurs, des casques complets aux casques croisés. Cette série de casques allie sécurité, esthétique et confort tout en se positionnant comme le meilleur rapport qualité/prix.fonctionnalités: système de ventilation protecteur du nez boucle micrométrique Pare-soleil visière auto-régulatrice Thermoplastique (ABS) Doublure intérieure amovible/lavable Visor Pinlock prêtSpécifications: ECE 2205 Poids: environ 1450 (-50g)Tailles: XS: (53/54) S: (55/56) M: (57/58) L: (59/60) XL: (61/62) XXL:(63/64)Contenu: 1x Casque Astone GT800 Evo Kaiman