Gratis
Apoyo
2in1 short jacket with breathable Cordura® AFT Features
500 D Polyamide 500 D Cordura® ribstop reinforcements on crash zones (100 % Polyamid) Cordura® AFT panels for best ventilation 3M™ Scotchlite™ reflectors high quality shoulder caps detachable Humax® membrane: 100 % waterpoof, 100 % windproof, breathable YF protectors on shoulder and elbow according to EN 1621-1:2012 elbow protectors are adjustable in height upgradable with SAS-TEC chest protectors SC-1/CP-2 upgradable with back protector SAS-TEC SC-1/11 for sizes XS - S upgradable with back protector SAS-TEC SC-1/12 for sizes M - 4XL connection zip safety seams
Description:1. Direct replacement to your original2. Plug-and-play, direct fit, easy installation3. Improved heat sink and charging capabilities4. Higher grade of electric components.Specification:Product Name: Voltage RegulatorMaterial: MetalPlasticColor: BlackWidth : 10cmLength : 11cmHeight : 5cmFixation holes center to center : 8.2cmWires Length: 61cm144cmNumber of plugs : 3Number of pins : 3Number of wires: 5Minimum Charging Voltage: 14.5 V +/- 0.5 VMaximum Charging Current: 50 A / 500 WOpen Circuit Voltage: 15 VOperation Temperature: -20℃ to 85℃Fitment:For Polaris Hawkeye 325 -- 2015For Polaris Scrambler 1000 XP -- 2014-2016For Polaris Scrambler 1000 XP Euro -- 2015For Polaris Scrambler 850 -- 2014-2016For Polaris Scrambler 850 Euro -- 2014-2015For Polaris Sportsman 1000 XP -- 2015-2016For Polaris Sportsman 325 ETX -- 2015For Polaris Sportsman 450 HO -- 2016-2018For Polaris Sportsman 550 -- 2010-2014For Polaris Sportsman 550 Forest -- 2011-2014For Polaris Sportsman 550 Touring -- 2011-2014For Polaris Sportsman 550 XP -- 2014For Polaris Sportsman 570 -- 2014-2018For Polaris Sportsman 570 Touring -- 2014-2018For Polaris Sportsman 850 -- 2015-2016For Polaris Sportsman 850 Forest -- 2012-2014For Polaris Sportsman 850 High Lifter -- 2016For Polaris Sportsman 850 Touring SP -- 2015For Polaris Sportsman 850 XP -- 2010-2014For Polaris Sportsman 850 XP EPS INTL -- 2010, 2012-2015For Polaris Sportsman X2 550 -- 2011-2014For Polaris Sportsman X2 570 -- 2015-2018For Polaris Spor
MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr
Specification:Product name: Turn Signal Indicator AdapterMaterial: PlasticColor: BlackDimension: 52.5x35mmSuitable for the installation of all kinds of converted steering lights, Indicator Light AdaptersFitment:For KAWASAKI Z250 Z300 Z650 Z750 Z800 Z900 Z1000 Z1000SX Z750S Z250SLFor KAWASAKI NINJA1000 NINJA650 NINJA650R NINJA250R NINJA300RFor KAWASAKI KLE Versys 1000 KLE Versys 650 VERSYS-X 300For KAWASAKI ER6N ER6F ZRX1200 KLE 500 KLR 650For KAWASAKI ZX6R ZX10R 2008-2017The Compatibility Is Just For Reference. Please Compare With Your Original One Before Purchasing!Note:1.We provide clear pictures, measurements where possible.Please check as much as possible to make sure the item is the one that you need.2.Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)Package Included:4 X Turn Signal Indicator Adapter
Universal Black Shark Fin Car Truck RV Radio Stereo AntennaProduct Description:With strong adhesive tape at bottomEasy to install, just stick it on the car surfaceWith Radio antenna functionSuitable for all carsSpecification:Size: 160x90x60mmLength of wire is approximately 6 feet.Materials: ABSColor: Black/White/SilverPackage Included:1 X Radio Antenna
Features
Kevlar® by DuPont ⢠strengthens knees, hips and buttocks including Trilobite® Premium protectors in knees certified to EN 1621-2 removable and height-adjustable prepared for hip protectors stretch panels adjustable waist removable suspenders (only for men) YKK zippers three outer pockets 3M Scotchlite reflective yarn extra high waist on the back fits perfectly with the Airtech motorcycle jacket