Weller WHS40 Temp Controlled Solder Iron

Faithfull Centre punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench. Carefully hardened and tempered and with a 90° ground point.Point Diameter: 1.6mm (1/16 in)Length: 100mm (4 in)

Listing Date:04/06/2023

Easy to operate due to its intuitive keypad and large, illuminated display for the best readability. Has a robust IP54 design for tough jobsite conditions and all-round softgrip protection for a long lifetime. Offers optimum work results due to its high measuring accuracy.

The Milwaukee M18 VC Vacuum has a powerful 18 volt motor with a maximum air flow of 1,246 l/min and 80 bar suction power. It has a HEPA rated 99.7 % high efficiency wet/dry filter, suitable for fine dust collection. Suitable for wet and dry applications. The vacuum has a built-in blower that provides 21 l/sec of air flow for maximum efficiency. Its stackable tool box design ensures added portability and easier storage. On-board accessory and hose storage allows quick access to accessories (washable filter, hose, crevice tool and utility nozzle supplied). The M18 VC works with all 18 Volt Milwaukee® slide rail batteries - M18 B/BX, C18 B/BX, V18 B, 18 V PBS 3000. The 7.5 litre capacity reduces downtime to emptying. Naked, batteries and charger NOT included. Specifications: Voltage: 18 Volt.Max. Airflow: 1,246 l/min.Max vacuum: 80 mBar.Tank volume: 7.5 litre.Hose Size: 31.5mm x 1.8m.Blower: Yes. Weight: 5.4 kg.

The SMJ IP44 Sunset Switch detects when light levels drop below a certain amount and then activates the switch with timer. It is ideal for use with garden lights and loads upto 1400 Watt. Supplied with or without a timer.The IP44 Sunset Switch with Timer. The timer function can be adjusted from 2 to 8 hours.

The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.