The Yale PM562 British Standard 5 lever mortice deadlocks offer a very high level of security and are suitable for use on external timber doors. The deadbolt is locked or unlocked by key from either side. The PM562 series lock are recommended by insurance companies, kitemarked to BS3621: 2007 and has been approved by the police Secured by Design initiative. These deadlocks also have a 20mm anti-saw deadbolt, an anti-drill case and have a 15 year guarantee. A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.The Yale Locks YALPM562PB25 PM562 Hi-Security BS 5 Lever Mortice Dead Lock 68mm 2.5 inch comes in the following:Finish: Polished BrassCase Size: 6mm x 89mm (2.5 inch)Backset: 45mm This is the measurement from the edge of the door to the centre of the keyhole.
The Kidde Professional Series alarms can interlink with up to 23 inter-connectible alarms, which means that all alarms will sound if any detect smoke or heat. This K30C Alarm detects heat of above 58°C (Class A2) and is recommended to be used in conjunction with interconnected smoke alarms. It is 230 volt mains powered, with a battery back-up in the event of a power failure. A Hush™ button allows temporary silencing of nuisance alarms caused by cooking or steam and resets automatically. In addition, this button is used to check the alarm operation. A lock-out feature prevents the alarm from being attached/fitted unless the back-up battery is installed. The alarm has an impressive sound rating of 85 decibel at 3 metres. For convenience, it has a front-loading battery door to allow the battery to be changed without removing the alarm. Technical specification:Model: K30CHeat detection: 58°CPower Supply: 230v mains-powered with 9V Alkaline battery back-upTemperature range: 0 to 40 degrees centigradeHumidity range: Up to 93% Relative Humidity (RH) non-condensingAlarm: 85 decibels.Kite marked to BS5446 part 2: 2003 CE tested and certified
Powered by Lithium Batterytech providing better performance and long battery life, the GSL700 offers a quick and easy blade change system enabling the blades to be switched between trimming and edging with the minimum of effort. The docking station and charger are separate to provide for maximum flexibility in the charging location. An integrated charging indicator enables the user better control of the charging status.
The Faithfull Bottle Jack is high quality and fitted with a unique overload protection system and large base to provide added stability. All stress points are reinforced for durability, and a heat treated extension screw with a serrated saddle provides a generous lifting area, a secure grip and can be adjusted for either a low pickup point or a maximum lift height. The Bottle Jack is supplied with a two piece handle and manufactured to EN 1494 specifications. This jack is for temporarily lifting vehicles only. Always use proper rated capacity axle stands for the vehicle after jacking.The FAIAUJACBOT4 Bottle Jack has the following specifications: Capacity: 4 Tonnes. Minimum height: 194mm. Lifting height: 118mm. Adjusting height: 60mm.