Brodit ProClip Angled mount - Halterung - Schwarz

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Kurzinfo: FUJITSU - Netzteil - 2 Ausgangsstecker Gruppe Netzgeräte & Batterien/Akkus Hersteller Fujitsu Hersteller Art. Nr. S26391-F2613-L620 Modell EAN/UPC 4053026651486 Produktbeschreibung: FUJITSU Netzteil Produkttyp Netzteil Abmessungen (Breite x Tiefe x Höhe) 6 cm x 5.1 cm x 3.2 cm Gewicht 103 g Lokalisierung Großbritannien und Nordirland, Vereinigte Staaten, Europa Erforderliche Netzspannung Wechselstrom 100/240 V (50/60 Hz) Geleistete Netzspannung 5 V Ausführliche Details Allgemein Produkttyp Netzteil Breite 6 cm Tiefe 5.1 cm Höhe 3.2 cm Gewicht 103 g Farbe Schwarz Lokalisierung Großbritannien und Nordirland, Vereinigte Staaten, Europa Stromversorgungsgerät Erforderliche Netzspannung Wechselstrom 100/240 V (50/60 Hz) Geleistete Netzspannung 5 V Ausgangsstecker Gesamt 2 : 4-poliger USB-Anschluss Typ A (nur Strom) Merkmale Kurzschlussschutz, Überspannungsschutz, Überstromschutz Verschiedenes Zubehör im Lieferumfang Europäischer Adapterstecker, Adapterstecker für die USA, Adapterstecker

IWH KFZ-Lammfellsitzbezug, anthrazit Sitzfläche aus 100 % Lammfell, leichte Montage - 1 Stück (010820)

IPRee™ Inflatable PVC Floating Row Large Swimming Boats Water Recreation Toy

Features: High quality replacement for your broken or missing roof antenna. Sturdy antenna with the weather resistance. Hold up in the long term UV exposure. Easy reliable installation.Screw it in the antenna base. Plug and Play. Compatible with many vehicles.

* Lightweight, extremely breathable polyester * Quick drying fabric removes moisture away from skin * Soft elastic waistband and simple slim bottom hem design for comfort | Article: Moose Racing XC1 Base Compression Pants, black, Size 2XL | Article: Moose Racing XC1 Base Compression Pants, black, Size 2XL, black, Size 2XL